Advertisement
C
R
LEANING THE
OLLERS WITH THE
The cleaning papers are designed to remove only loose paper dust and ink
from the rollers. Use the cleaning paper approximately every 1,000 sheets
scanned. They are to be used in between the thorough cleanings of the
scanner. Using the cleaning paper does not take the place of the
more complete cleanings described later in this section
•
Set the Hopper Guides to
the widest width possible.
•
Spray the Cleaning Paper lightly with F1 Cleaner and place the
Cleaning paper against the right edge of the Hopper Guide. Using the
Scanning Application scan the cleaning paper. Do Not Save These
Images. This operation is used only to pass the cleaning paper through
the paper feed path. Check the path to see if it needs further cleaning, if
you find debris in the paper path perform this cleaning or the
ADF
L
-F
WITH
INT
REE
•
Place the Cleaning Paper against the Left Hopper Guide and perform the
previous step.
fi-5110 S
S500 S
ERIES
C
P
LEANING
APER
C
in the following steps.
LOTHS
C
R
CANNER
ONSUMABLE
EPLACEMENT AND
Hopper
Guides
C
LEANING THE
C
I
LEANING
NSTRUCTIONS
9
Advertisement
