Fujitsu fi-5110 SERIES S500 Cleaning Instructions Manual page 6

fi-5110 S S500 S
ERIES CANNER
6
C R
ONSUMABLE EPLACEMENT AND
R P
EPLACING THE ICK
• Lift the Pick Roller Shaft out
of the scanner.
• Lift up slightly on the Tab
shown and slide the Pick
Roller off of the shaft in the
direction of the arrow while
the assembly is out of the
scanner.
• Attach the new Pick Roller by
sliding it on to the shaft.
Rotate the Pick Roller to
align the screw on the shaft
with the slot on the Pick
Roller. Be sure the Pick
Roller tab clicks and the Pick
Roller is locked in place on
the shaft.
• Reinstall the Pick Roller
Shaft with the new Pick
Roller installed in reverse
order used to remove the
Pick Roller Shaft.
C I
LEANING NSTRUCTIONS
R ( .)
OLLER CONT
Shaft
T ab
Shaft
Pick roller
Pick roller
Groove
Protrusion