Change A Channel Or Frequency; Replay Mode - Uconnect 730N Owner's Manual Supplement

12 Uconnect® MULTIMEDIA (RADIO)
to change the vehicle's position in order to receive a
signal. In most cases, the satellite radio does not receive
a signal in underground parking garages or tunnels.

Change A Channel Or Frequency

Press the SEEK up or the SEEK down hard-key to play
the next available station or channel.
Select DIRECT TUNE to enter a frequency or a channel
number, and confirm your selection by pressing the GO
soft-key.
Touch the left arrow soft-key to step down
manually through the frequency or channel
roster.
Touch the right arrow soft-key to step up
manually through the frequency or channel
roster.
Select the SCAN soft-key for a five second preview of
each listenable station in the frequency band. Touch the
SCAN soft-key again to stop the scan function and to
select a radio station.

Replay Mode

Select the REPLAY soft-key for a replay of the currently
playing satellite radio station.
Use the left and right arrow soft-keys to move the red
replay slider. Depending on broadcast format, it is pos-
sible to replay up to one hour.
It is also possible to use the PAUSE/PLAY soft-key to
pause the playback for up to an hour.
Select the LIVE soft-key to receive the currently playing
satellite radio station.