Page 2
NOTICE: This Class B digital apparatus complies with Canadian ICES-003. NOTICE: This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada]. Operation is subject to...
Page 3
the following two conditions: this device may not cause NOTE: harmful interference, and this device must accept any This equipment has been tested and found to comply interference received, including interference that may with the limits for a Class B digital device, pursuant to cause undesired operation.
Page 4
Safety Information End User License Agreement NAVTEQ Exposure to Radio Frequency Radiation The radiated PLEASE READ THIS END USER LICENSE AGREE- output power of the this internal wireless radio is far MENT CAREFULLY BEFORE USING THE NAVTEQ below the FCC radio frequency exposure limits. Never- DATABASE NOTICE TO THE USER THIS IS A LICENSE theless, the wireless radio shall be used in such a manner AGREEMENT - AND NOT AN AGREEMENT FOR...
Page 5
OWNERSHIP LIMITATIONS ON USE The Database and the copyrights and intellectual prop- The Database is restricted for use in the specific system erty or neighboring rights therein are owned by for which it was created. Except to the extent explicitly NAVTEQ or its licensors.
Page 6
TRANSFER OF LICENSE efforts to repair or replace your nonconforming copy of the Database. If these efforts do not lead to performance of the You may not transfer the Database to third parties, except Database in accordance with the warranties set out herein, when installed in the system for which it was created or you will have the option to either receive a reasonable when you do not retain any copy of the Database, and...
Page 7
If you did not acquire the Database from NAVTEQ NAVTEQ has been advised of the possibility of such directly, you may have statutory rights against the person damages. In any event NAVTEQ’s liability for direct from whom you have acquired the Database in addition damages is limited to the price of your copy of the to the rights granted by NAVTEQ hereunder according to Database.
Page 8
slope or grade; bridge height, weight or other limits; road End-User License Agreement Gracenote or traffic conditions; special events; traffic congestion; or USE OF THIS PRODUCT IMPLIES ACCEPTANCE OF travel time. THE TERMS BELOW. GOVERNING LAW Gracenote® MusicID® Terms of Use This Agreement shall be governed by the laws of the This device contains software from Gracenote, Inc.
Page 9
You agree that you will use Gracenote Data, the You agree that Gracenote, Inc. may enforce its rights Gracenote Software, and Gracenote Servers for your own under this Agreement against you directly in its own personal noncommercial use only. You agree not to name.
You have full responsibility and assume at a safe location. Only use the Uconnect® features all risks related to the use of the Uconnect® features when it is safe to do so. and applications in this vehicle. Only use Uconnect®...
INTRODUCTION 5 • There may be situations where the navigation system • The law in some states prohibits the Front Seat DVD erroneously displays the vehicle’s location. Use your Viewer even while in park. As a result, it may be own driving judgement in this situation, taking into disabled prior to delivery to you.
6 INTRODUCTION SAFETY REFERENCES SYSTEM CARE Before operating this navigation system, review the Software Update safety precautions described in this manual. If you have Both navigation data and Gracenote® data are software any questions, please contact the vehicle manufacturer. updatable. Visit DriveUconnect.com or contact your authorized dealer for the latest available software.
INTRODUCTION 7 NOTE: Any attached cable should be routed so that it will not apply any pressure to the connection. • Many features of this radio are speed dependent. Do not use a USB device which will interfere with the For your own safety it is not possible to use the operation of opening the display.
8 INTRODUCTION If necessary, use a lint-free cloth dampened with a GPS Navigation Antenna (Export Vehicles Only) cleaning solution such as isopropyl alcohol or an isopro- The antenna for the navigation GPS system is mounted in pyl alcohol and water solution ratio of 50:50. Be sure to various locations (depending on the vehicle model) follow solvent manufacturer’s precautions and direc- within the dashboard.
INTRODUCTION 9 Other Electronic Devices If you bring other electronic devices into your vehicle (e.g., PDA, iPod®, laptop computer, CB Radios, etc.), some may cause electromagnetic interference with the GPS. If a degradation in the navigation system is ob- served, turn the devices off, or keep them as far away from the GPS antenna as possible.
Page 22
GENERAL HANDLING CONTENTS USER INTERFACE ELEMENTS ....12 ▫ HDD/Disc/iPod® Operation ....16 ▫ Buttons On The Touchscreen ....12 ▫...
12 GENERAL HANDLING USER INTERFACE ELEMENTS Buttons On The Touchscreen Buttons on the touchscreen are accessible on the touch- screen. Buttons On The Faceplate Buttons on the faceplate are on the left and right side of the radio faceplate. 1 — OPEN/CLOSE To open or close the display, push the OPEN/CLOSE button on the faceplate (1).
Page 24
GENERAL HANDLING 13 NOTE: (2) SEEK UP/SEEK DOWN It may take several seconds to recognize the type of Push the SEEK up and the SEEK down buttons on the inserted disc (CD, DVD, MP3, etc.). faceplate (2) to seek through radio stations in AM, FM, or SAT bands.
Page 25
The navigation software is always working when the NOTE: ignition is switched ON, even if the radio is in standby Some vehicles may be equipped with a Uconnect® mode. It is possible to eject the CD and to display the Phone button on the steering wheel.
GENERAL HANDLING 15 8 — NAV Electronic Vehicle Information Center (EVIC) Push the NAV button on the faceplate (8) either to switch Some vehicles feature an Electronic Vehicle Information to the navigation mode or to toggle between the naviga- Center (EVIC) with driver-interactive display. The EVIC tion menu and the map viewer menu.
16 GENERAL HANDLING The following describes general steering wheel function- 4. The SCROLL rocker switch, located on the left, ality: changes selections such as radio station, CD track, and satellite radio channel, depending upon the current 1. The VOLUME rocker switch, located on the right, mode.
GENERAL HANDLING 17 Video Entertainment System (VES™) Operation If equipped with a remote video player, this control will function the same way as in disc mode. AUDIO SETTINGS Volume Use the ON/OFF VOLUME rotary knob (4) to adjust the volume of the currently playing audio source. While you adjust the volume, the name of the audio source and a volume indicator are displayed in the lower left corner of the display.
Page 29
18 GENERAL HANDLING Press the Equalizer button on the touchscreen and use either the arrow button on the touchscreens or the sliders on the screen to adjust BASS, MID, and/or TREBLE.
Page 30
VOICE COMMAND TUTORIAL ... . .33 STORE RADIO PRESETS ....22 Uconnect® PHONE TUTORIAL ... . .33...
20 GETTING STARTED GETTING STARTED DISCLAIMER FOR NAVIGATION RADIO NOTE: The ignition switch must be in the ON or ACC position to operate the navigation radio. If the unit is off, switch it on using the ON/OFF Volume rotary knob. BUTTONS ON THE TOUCHSCREEN The BACK button on the touchscreen takes you to the previous screen.
GETTING STARTED 21 CHANGE THE LANGUAGE The navigation radio will conform to the vehicle lan- guage set in the Electronic Vehicle Information Center (EVIC), if equipped. If you change the language in the navigation radio, the system will change the language for all display informa- tion.
22 GETTING STARTED 2. Press the Set Time Zone button on the touchscreen to SET THE TIME change to the desired time zone. 1. Press the Time Display button in the lower left corner of the screen. 3. Press the Daylight Savings button on the touchscreen to switch Daylight Savings on or off.
Page 34
GETTING STARTED 23 3. Either push the SEEK up/down buttons on the face- You can use the PRESETS button on the touchscreen to plate, or press the SCAN button on the touchscreen, toggle between: DIRECT TUNE button on the touchscreen, or the left To turn the preset list off.
24 GETTING STARTED CONNECT BLUETOOTH® DEVICES NOTE: Visit DriveUconnect.com for a list of compatible phones/devices. 1. Push the MENU button on the faceplate on the right side of the radio. 2. Press the System Setup button on the touchscreen to enter the System Setup menu.
Page 36
GETTING STARTED 25 5. Enter any four Digit Security PIN and press the PAIR 7. You will then be asked to set a priority for the paired button on the touchscreen again. phone. If there is more than one paired phone avail- able, the navigation radio will try to connect to the 6.
26 GETTING STARTED NOTE: If the phone book download feature is supported by your cell phone, only the first 1000 contacts will be automatically copied to the radio. Contacts will be downloaded from your SIM card first and then copied from your phones default phone book.
GETTING STARTED 27 ENTER HOME ADDRESS 1. Push the NAV button on the right side of the radio faceplate. If the radio does not display the NAV - Main Menu, push the NAV button on the faceplate again, or press the MAIN MENU button on the touchscreen. 4.
Page 39
28 GETTING STARTED If no home address has been set, press YES to access the 4. Press the button on the touchscreen with your state’s Enter Home Address menu. name and enter your street name into the speller. 3. Press Street Address to enter your address.
Page 40
GETTING STARTED 29 6. Enter the house number into the next screen. If more than one city has this address, you will then need to select your city from a list. Once the address is entered completely, the system shows a map of your home address area.
30 GETTING STARTED CHANGE HOME ADDRESS This procedure will allow you to change your Home Address if one has already been entered. 1. Push the MENU button on the faceplate. 3. Press the My Address Book button on the touchscreen. 2.
Page 42
GETTING STARTED 31 4. Press the Home button on the touchscreen. 7. Press the button on the touchscreen with your state’s name and enter your street name into the speller. 5. Press the Edit Contact button on the touchscreen. NOTE: 6.
Page 43
32 GETTING STARTED • There may be instances when entering a city first 9. Enter the house number into the next screen. If more prior to the address will locate the correct address than one city has this address, you will then need to more accurately.
Push any button on the faceplate or press the display to cancel the tutorial. Uconnect® PHONE TUTORIAL When you push the Uconnect® Phone button on the faceplate, you will hear a beep. The beep is your signal to give a command. Say TUTORIAL to listen to a Uconnect®...
Page 46
Uconnect® MULTIMEDIA (RADIO) CONTENTS RADIO MODE......37 ▫ Manage SAT Favorites ....42 ▫...
Uconnect® MULTIMEDIA (RADIO) 37 RADIO MODE SiriusXM Satellite Radio Mode SiriusXM Satellite radio uses direct satellite-to-receiver Overview broadcasting technology to provide clear digital sound, The RHR navigation radio (NTG4 Refresh) is equipped coast to coast. The subscription service provider is with three different tuners: SiriusXM Satellite Radio.
38 Uconnect® MULTIMEDIA (RADIO) This functionality is only available for radios equipped Press the “Left Arrow” button on the touch- with a Satellite receiver. In order to receive satellite radio, screen to step down manually through the the vehicle needs to be outside with a clear view to the frequency or channel roster.
Uconnect® MULTIMEDIA (RADIO) 39 Replay Mode Select the REPLAY button on the touchscreen for a replay of the currently playing satellite radio station. Use the left and right arrow buttons on the touchscreen to move the red replay slider. Depending on broadcast format, it is possible to replay up to one hour.
40 Uconnect® MULTIMEDIA (RADIO) You may use the LIST button on the touchscreen to toggle To store the desired station, press and hold one of the between: station preset buttons on the touchscreen for two seconds and you will see the highlighted button on the touch- To sort the list by artist.
Uconnect® MULTIMEDIA (RADIO) 41 SiriusXM Satellite Radio Favorites Display SAT Favorites List (SAT Favorites) Press the SEARCH/BROWSE button on the You can save 50 favorite songs and 50 favorite artists. touchscreen and select Favorites from the SAT Browse screen. Press the add favorite button on the touch-...
42 Uconnect® MULTIMEDIA (RADIO) Press the SETUP button on the touchscreen to manage the SAT Favorites settings. Manage SAT Favorites Press the SEARCH/BROWSE button on the touchscreen, select Favorites from the SAT Browse screen. The checkmarks in the Song Alerts and Game Alerts button on the touchscreen indicate active alerts.
Uconnect® MULTIMEDIA (RADIO) 43 The checkmark in the button on the touchscreen marks Radio Text Information enabled favorites. Press the desired button on the touch- Select the INFO button on the touchscreen to screen to de-activate the favorite, or press a correspond-...
44 Uconnect® MULTIMEDIA (RADIO) RBDS (FM) Program Types Scan By Genre Adult Hits, Classic Rock, Classical, College, Country, Press the SEARCH/BROWSE button on the Information, Jazz, Language, News, Nostalgia, Oldies, touchscreen, select View Genres from the SAT Personality, Public, Religious Music, Religious Talk, Browse screen.
Uconnect® MULTIMEDIA (RADIO) 45 Example: Select the Rock category by pressing the Rock button on the touchscreen. The radio displays all available station in this category. Press the button on the touchscreen with the correspond- ing artist, or song to switch to play the desired channel.
46 Uconnect® MULTIMEDIA (RADIO) Game Zone SiriusXM SATELLITE TRAVEL LINK Press the SEARCH/BROWSE button on the Push the MENU button on the faceplate and then the touchscreen, select Game Zone from the SAT Travel Link button on the touchscreen. Browse screen.
Uconnect® MULTIMEDIA (RADIO) 47 Select Fuel Prices to check local gas and diesel prices. Select Movie Listings to check local movie theaters and listings. Select Sports to check in-game and final scores as well as upcoming schedules. Select Favorites to display your favorite selections.
Page 59
48 Uconnect® MULTIMEDIA (RADIO) To sort the list by price. To sort the list by distance to the current vehicle location. To sort the list by alphabet. Press the FUEL button on the touchscreen to select the desired fuel grade used in the list view.
Page 60
Uconnect® MULTIMEDIA (RADIO) 49 Press the button on the touchscreen with the desired gas Press the favorite gas station button on the station to display details for the selected gas station. touchscreen to save this gas station as favorite. Once a gas station is selected as favorite, the button on the touchscreen changes.
50 Uconnect® MULTIMEDIA (RADIO) Changing A SiriusXM Travel Link Favorite Once a favorite was selected, the name and the selected fuel price is displayed in the SiriusXM Favorites screen. For example: Press the Forecast button on the touch- screen in the Travel Link screen.
Uconnect® MULTIMEDIA (RADIO) 51 Deleting A SiriusXM Travel Link Favorite Sports Team Press the favorite weather station button on the touch- screen to make the current weather station a favorite. The new favorite weather station replaced the old favorite weather station.
52 Uconnect® MULTIMEDIA (RADIO) Weather Map Press the FAV button on the touch- screen to remove the team from the Favorites list. Press the Weather Map button on the touchscreen in the SiriusXM Travel Link screen.
Page 64
Uconnect® MULTIMEDIA (RADIO) 53 Press the U.S. button on the touchscreen to zoom into the entire U.S. Press the 150 mi, 50 mi, or 15 mi button on the touchscreen to zoom into the desired area of the map. A lighter button on the touchscreen color indicates a selected zoom level.
Page 65
54 Uconnect® MULTIMEDIA (RADIO) Press the button on the touchscreen with the storm name Press the MAP button on the touchscreen to see a to access more detailed information. graphical depiction of the warning area.
Page 66
Uconnect® MULTIMEDIA (RADIO) 55 Press the DETAILS button on the touchscreen to receive Press the NEXT and PREV button on the touchscreen to detailed text message for the selected weather warning. page through the entire message.
Page 67
56 Uconnect® MULTIMEDIA (RADIO) Press the weather updates button on the touch- screen to check for the time of the last weather data update. Press the dim button on the touchscreen to dim or highlight the radar map color chart.
Uconnect® MULTIMEDIA (RADIO) 57 RADIO SETTINGS AM/FM Menu There are no specific settings for this mode. SAT Menu While in SAT mode, push the MENU button on the faceplate to display the SAT Menu. Favorites Select Favorites to manage the SAT Favorites. (see Satel- lite Radio Mode for more information).
58 Uconnect® MULTIMEDIA (RADIO) Parental Lockout Select Parental Lockout to enable and/or disable desired channels. The SEEK and SCAN function will then only display channels without parental lockout. Re-Subscribe To SiriusXM Satellite Radio New vehicle purchasers or lessees will receive a one year subscription to SiriusXM Satellite Radio and SiriusXM Traffic on properly equipped vehicles.
Uconnect® MULTIMEDIA (RADIO) 59 Select the Nighttime Colors button on the touchscreen to Display Settings switch to manual nighttime mode and to adjust the Push the MENU button on the faceplate and press the brightness of the display using nighttime colors.
60 Uconnect® MULTIMEDIA (RADIO) Press the Picture View button on the touchscreen to View Settings enable the picture view mode, where a picture can be Push the MENU button on the faceplate to display a displayed on the right half of the radio screen. Refer to radio menu.
Uconnect® MULTIMEDIA (RADIO) 61 When equipped with ParkView®, the radio display ParkView® Rear Backup Camera (If Equipped) shows the rear view camera picture as soon as the shifter is moved to the REVERSE position for vehicles with an automatic transmission. In vehicles with a manual trans- mission, the REVERSE gear must be engaged.
Uconnect® MULTIMEDIA (MEDIA) 65 The radio is capable of playing compact discs (CD), DISC MODE recordable compact discs (CD+R and CD-R), rewritable Overview compact discs (CD+RW and CD-RW), recordable DVD-R, The navigation radio is equipped with a CD/DVD DVD+R, DVD-RW, and DVD+RW compact discs.
66 Uconnect® MULTIMEDIA (MEDIA) High definition content and media (e.g., HD-DVD, Blu- Inserting A Disc Ray) is not supported. 1. Push the OPEN/CLOSE button on the faceplate once. If the user does not remove an ejected CD within 2. With the printed side upwards, insert the disc into the approximately 10 seconds, the CD will reload.
Uconnect® MULTIMEDIA (MEDIA) 67 Removing A Disc From The Radio Selecting Disc Mode Toggle between the media and the radio menus by 1. Push the OPEN/CLOSE button on the faceplate. pushing the RADIO/MEDIA button on the faceplate. The 2. The disc is ejected and can be removed.
68 Uconnect® MULTIMEDIA (MEDIA) Next Track Fast Forward Track Press the SEEK up button on the touchscreen, the next Press and hold the Fast Forward button on the track on the disc is played. Once the last track has been touchscreen.
Uconnect® MULTIMEDIA (MEDIA) 69 Select Title From List Gracenote® Music Recognition Technology Select TRACKS to display a list of the titles of the currently playing disc. Se- lect the desired track you wish to play. Select TRACKS to hide the list.
70 Uconnect® MULTIMEDIA (MEDIA) Data will be found for most Audio CDs (CDA discs). The copy progress is shown in the display. It is possible Data will not be found for DVDs or data discs (those with to listen to radio modes during this process. Copying MP3 or WMA files).
Uconnect® MULTIMEDIA (MEDIA) 71 Disc Menu Playing a MP3/WMA Disc While in disc mode with an audio disc inserted, push the 1. Push the OPEN/CLOSE button on the faceplate once. MENU button on the faceplate to access the Disc Menu.
72 Uconnect® MULTIMEDIA (MEDIA) Playing A Video DVD NOTE: Viewing a DVD video on the radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shifter must be in the PARK position for vehicles with an automatic transmission. In vehicles with a manual transmission, the parking brake must be engaged also.
Uconnect® MULTIMEDIA (MEDIA) 73 Press the VIDEO button on the touchscreen to view the Press the cursor arrow button on the touchscreen to select video on the screen. the title you want to view, then press the ENTER button on the touchscreen to start playback.
74 Uconnect® MULTIMEDIA (MEDIA) Press the STOP touchscreen to stop playback. DVD Playback Controls In video playback mode, press anywhere on the screen to Press the REVERSE button on the touchscreen show the DVD playback controls. during playback to fast reverse playback.
Uconnect® MULTIMEDIA (MEDIA) 75 In the DVD Setup menu you may select Menu Language, DVD Video Menu Audio Language, Subtitle, Camera Angle, Aspect Ratio, While in disc mode with a DVD inserted, push the and Brightness settings by pressing the corresponding MENU button on the faceplate to access the DVD Video button on the touchscreen.
76 Uconnect® MULTIMEDIA (MEDIA) HARD DISK DRIVE MODE (HDD) The HDD mode gives you access to the audio files on the internal hard disk drive. It functions similar to a CD player, with the exception that the internal HDD can hold more tracks.
Page 88
Uconnect® MULTIMEDIA (MEDIA) 77 4. Select My Music. 6. Press the From DISC button on the touchscreen in the next screen to copy music tracks of the inserted disc to 5. Press the Add Music Files to HDD button on the the hard disk drive.
78 Uconnect® MULTIMEDIA (MEDIA) Copy WMA/MP3 Files To Hard-Drive You can copy MP3 and WMA formatted compressed audio files from a disc or via USB (e.g., USB stick). It is recommended to sort music files into folders. The copy progress is shown in the display.
Uconnect® MULTIMEDIA (MEDIA) 79 Songs located in the root level (top level) of the disc or Selective Song Copying From Disc USB device are displayed in a folder named Disc (or the You can select specific songs on a WMA/MP3 disc using physical disc name) for disc media or USB for USB stick.
Page 91
80 Uconnect® MULTIMEDIA (MEDIA) 3. Select My Music. 4. Press the Add Music Files button on the touchscreen. 5. Press the From DISC button on the touchscreen in the next screen. 6. Select the folders or titles you would like to copy, by...
Uconnect® MULTIMEDIA (MEDIA) 81 A red check mark indicates the selected songs and/or Copying From USB folders. Press the ALL button on the touchscreen to select 1. Insert a USB device. all files and folders at once. Wait until the radio starts playing the music from the NOTE: USB device.
82 Uconnect® MULTIMEDIA (MEDIA) 3. Press the SAVE button on the touchscreen to start the Playing Audio Files From The Hard Disk Drive copy process. Push the RADIO/MEDIA button on the faceplate and The copy process is shown on the display. It is possible to select the HDD tab.
Uconnect® MULTIMEDIA (MEDIA) 83 Next Track Push the SEEK up button on the faceplate. The next track of the current playlist will play. Once the last track has been reached in the forward direction, the unit will loop back to the first track.
84 Uconnect® MULTIMEDIA (MEDIA) Fast Forward Track HDD Menu Press and hold the Fast Forward button on the While in HDD mode, push the MENU button on the touchscreen. The audio will be heard at a reduced faceplate to access the HDD Menu.
Uconnect® MULTIMEDIA (MEDIA) 85 Favorite Playlists On The Hard Disk Drive You may save links to favorite playlists/folders in the Favorite list. 2. Press one of the ADD FAVORITE buttons on the touchscreen. 1. Press the Favorites button on the touchscreen to...
Page 97
86 Uconnect® MULTIMEDIA (MEDIA) 3. You may favor an artist, an album, a genre, or a A link to the selected Album is now saved in the Favorite playlist (folder). For this example select the Albums Playlists list. category. You may save up to 12 favorites.
Uconnect® MULTIMEDIA (MEDIA) 87 NOTE: 4. Press the NEW button on the touchscreen to create a The link to the favorite playlist will be removed after a new folder. playlist was removed from the My Playlists menu. Refer to Editing Playlists on the Hard Disk Drive in this manual.
88 Uconnect® MULTIMEDIA (MEDIA) Managing Playlists On The Hard Disk Drive (Folders) 1. While in the HDD mode, press the MENU button on the faceplate to access the HDD Menu. 6. The song is now assigned to the new folder. Press the EXIT button on the touchscreen to switch back to the HDD screen.
Page 100
Uconnect® MULTIMEDIA (MEDIA) 89 3. Select My Music. You may now add music files, delete music files, or rename folders on the HDD.
90 Uconnect® MULTIMEDIA (MEDIA) Deleting All Playlists From The Hard Disk Drive 1. Press the MENU button on the faceplate on the right side of the radio. 2. Press the System Setup button on the touchscreen to access the System Setup menu.
Uconnect® MULTIMEDIA (MEDIA) 91 inserted device. The device’s current limitation must be Importing Pictures less or equal to 1A. It is possible to import display pictures to the internal hard disk drive. The pictures can be displayed on the 1. Insert either a CD or a USB device containing your right half of the radio screen.
Page 103
92 Uconnect® MULTIMEDIA (MEDIA) 3. Press the My Pictures button on the touchscreen to get 4. Press one of the ADD button on the touchscreen. an overview of the currently stored images. NOTE: Only JPEG format will be recognized.
Page 104
Uconnect® MULTIMEDIA (MEDIA) 93 5. Select the type of media inserted. 7. Confirm your selection by pressing the SAVE button on the touchscreen. 6. Use the PAGE button on the touchscreens to page through a list of pictures and press the picture you...
Page 105
94 Uconnect® MULTIMEDIA (MEDIA) The imported picture is now available in the Manage My 9. Select this picture by pressing the Picture View button Pictures screen. on the touchscreen. A check mark indicates the cur- rently used picture. 8. In order to display the imported picture in the radio...
Page 106
Uconnect® MULTIMEDIA (MEDIA) 95 Press the DELETE button on the touchscreen to delete the picture from the hard disk drive. The picture is now displayed on the right half of the screen. 10. Push the MENU button on the faceplate twice and then press the Picture View button on the touch- screen to enable the picture view.
Page 108
Uconnect® MULTIMEDIA (REMOTE DEVICES) CONTENTS AUX MODE — IF EQUIPPED ....99 ▫ Pause ......102 ▫...
Page 109
98 Uconnect® MULTIMEDIA (REMOTE DEVICES) Bluetooth® AUDIO STREAMING MODE ..104 USB CONNECTOR..... .108 ▫ Playing Audio Files From The iPod® Device . . .105 ▫...
Uconnect® MULTIMEDIA (REMOTE DEVICES) 99 2. Press the button on the touchscreen with the desired AUX MODE — IF EQUIPPED list item to select and play the item. The AUX mode gives you access to the audio files on an external digital player device.
100 Uconnect® MULTIMEDIA (REMOTE DEVICES) Press a button on the touchscreen with the desired artist’s Select An iPod® Category name to play songs from this artist. The iPod® can sort the files by playlists, by song names, by artists, by composers, by genres, by albums, by Press the ALL button on the touchscreen to play songs podcasts or by audio books.
Uconnect® MULTIMEDIA (REMOTE DEVICES) 101 Press the GO button on the touchscreen to jump to the List Jump desired artist. If you encounter a very long list, it may be helpful to press the A to Z button on the touchscreen to go to the Press a button on the touchscreen with the desired artist’s...
102 Uconnect® MULTIMEDIA (REMOTE DEVICES) Fast Forward Track Play Press the Fast Forward button on the touchscreen. Press the “PLAY” button on the touchscreen to start the The audio will be heard at a reduced level while playback. going through the track in this mode. Stop the fast...
Uconnect® MULTIMEDIA (REMOTE DEVICES) 103 NOTE: Track Info For shuffle/repeat, settings will reflect current setting Press the INFO button on the touchscreen. of device being accessed but can be changed accord- Information on the currently playing track, if available, ingly via the radio touchscreen.
104 Uconnect® MULTIMEDIA (REMOTE DEVICES) Random Playback Bluetooth® AUDIO STREAMING MODE The random playback function plays random tracks from The Bluetooth® Audio Streaming mode gives you access the iPod® device. Press the Shuffle button on the touch- to the audio files on the external Bluetooth® device. The screen to switch the random play function on or off.
Uconnect® MULTIMEDIA (REMOTE DEVICES) 105 • Not all functions of a Bluetooth® device can be controlled by the radio. See the Bluetooth® device manufacturer website for updates. • Different generations of Bluetooth® devices will support different levels of features (Scan, FF, RW, Play/Pause, etc.).
106 Uconnect® MULTIMEDIA (REMOTE DEVICES) PLAY Press the PLAY button on the touchscreen to start the Bluetooth® audio stream. VIDEO ENTERTAINMENT SYSTEM (VES™) The navigation radio can remotely control the VES™. Refer to the VES™ section of the vehicles Owner’s Manual on the DVD for additional details.
Uconnect® MULTIMEDIA (REMOTE DEVICES) 107 DVD Player is not available if there is no DVD player in the VES™ or there is no DVD in the player. A device must be plugged into the AUX jack of the VES™ to be available.
108 Uconnect® MULTIMEDIA (REMOTE DEVICES) Some player devices cannot be controlled through the USB CONNECTOR USB connector. Some player devices save music files in It is possible to transfer audio files or pictures files to the MP4 format, which cannot be played in this radio. Some navigation radio.
Uconnect® MULTIMEDIA (REMOTE DEVICES) 109 How To Open The Cover 2. Pull forward. NOTE: 1. Place finger under the pull arrow. The flap is attached and should not be removed! Do not pull the flap off of the frame. Do not use a tool (e.g., screw driver, nail file, etc.) to open the flap, as this...
110 Uconnect® MULTIMEDIA (REMOTE DEVICES) How To Close The Cover 2. Hook the top hooks (1) into the frame first. 1. Using your thumb and index finger, grasp the flap. Notice the hooks (1), which must first be inserted into...
Page 122
Uconnect® MULTIMEDIA (REMOTE DEVICES) 111 CAUTION! Never force any connector into the ports of your radio. Make sure your connectors are the identical shape and size before you connect. 3. Then push on the bottom of the flap to secure in place.
112 Uconnect® MULTIMEDIA (REMOTE DEVICES) the navigation radio and to the earphone connector of AUX MODE your audio device. The AUX connector allows you to connect the headset The display will switch automatically to the AUX mode output of an audio device (e.g., MP3 player) to the naviga- when a 3.5 mm stereo mini-jack cable has been connected.
114 VOICE COMMAND When you push the Voice Command button VOICE COMMAND OPERATION on the faceplate, you will hear a beep. The beep Voice Command allows you to control your AM and FM is your signal to give a command. radio, satellite radio, disc player, navigation system, hard disk drive storage, AUX mode devices (digital music NOTE:...
Page 126
VOICE COMMAND 115 These commands are universal and can be used from any At any point, if the system does not recognize one of your menu or screen. commands, you will be prompted to repeat it. All other commands can be used depending upon the NOTE: active application.
116 VOICE COMMAND Display Menu Commands In addition to audible help, the navigation radio is able to The Voice Command understands two types of com- display the most important available commands on the mands. Universal commands are available at all times. screen.
VOICE COMMAND 117 Main Menu Radio Menu Start a dialogue by pushing the Voice Command but- You may say RADIO to switch to AM, FM, or SAT. ton on the faceplate. Say RADIO MENU. In this mode you may say the You may say MAIN MENU to switch to the main menu.
118 VOICE COMMAND • PREVIOUS STATION (to select the previous station) Satellite Radio To switch to satellite radio mode say SAT or SATELLITE • RADIO MENU (to switch to the radio menu) RADIO. • MAIN MENU (to switch to the main menu) In this mode you may say the following commands: Radio FM •...
To switch to the HDD mode say HARD DRIVE. • LIST DEVICES (to list connected devices) In this mode you may say the following commands: • UCONNECT DEVICE SETUP (to pair a device or to select a device) • TRACK (1-250) (to change the track) •...
120 VOICE COMMAND • PLAY PLAYLIST plus the desired playlist name (to AUX Mode (With Synced Device Attached) play playlists by name) If the attached AUX device is capable of syncing a table of contents of the attached device to the radio, you may say •...
VOICE COMMAND 121 • PLAY MEMOS (to play previously recorded memos). Memo During the playback you may push the Voice Com- To switch to the voice recorder mode say MEMO. mand button on the faceplate to stop playing In this mode you may say the following commands: memos.
122 VOICE COMMAND • INPUT CITY NAME Navigation To switch to the navigation mode say NAVIGATION. • INPUT STREET NAME NOTE: • INPUT HOUSE NUMBER – INTERSECTION • Not all commands will be available at all times, depending upon the system context. –...
Page 134
VOICE COMMAND 123 • INTERSECTION • TRAVEL INFO • CANCEL DESTINATION ENTRY • MAP OPTIONS – RECENT DESTINATIONS – MAP – ZOOM IN • ROUTING OPTIONS – GO – ZOOM OUT – STOP ROUTING • ADDRESS BOOK – MUTE GUIDANCE –...
System Setup Voice Training To switch to the system setup say SETUP. For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the Uconnect® You can say: Phone system Voice Training feature may be used. • LANGUAGE 1.
Page 136
VOICE COMMAND 125 If the system does not understand the words VOICE • Press the Start Voice Training button on the touch- TRAINING: screen to train the Voice Command system. 1. Push the MENU button on the faceplate. • Press the Listen to Tutorial button on the touchscreen to hear instructions on voice training.
Page 139
Uconnect® Phone system. Safety advice: While the vehicle is parked, practice the use of the Uconnect® Phone system until you are familiar with its functionality.
Page 140
HANDS FREE COMUNICATION 129 PHONE SYSTEM SETUP – PAIRING 1. Push the MENU button on the faceplate on the right side of the radio. 3. Press the Device Pairing button on the touchscreen to access the Bluetooth® Devices menu. 2. Then press the System Setup button on the touch- screen to get to the System Setup menu.
Page 141
130 HANDS FREE COMUNICATION This menu lists all paired Bluetooth® devices. 5. You can use the BACK button on the touchscreen to switch to the previous menu. 4. Press the PAIR button on the touchscreen to start a new pairing. 6.
Page 142
HANDS FREE COMUNICATION 131 7. The pairing procedure starts. Refer to the user’s 8. You will then be asked to set a priority for the paired manual of your Bluetooth® phone to complete the phone. If there is more than one paired phone avail- procedure on your phone.
Page 143
132 HANDS FREE COMUNICATION 9. You may now change the device name. 11. You may rename the device, set it as active phone, if more than one device is connected, modify the phone NOTE: priority, or delete the pairing. You can enter up to 20 characters. 10.
Page 144
HANDS FREE COMUNICATION 133 12. Press the phonebook update button on the touch- screen to download the phone book into the radio. NOTE: If the phone book download feature is supported by your cell phone, only the first 1000 contacts will be automatically copied to the radio.
Page 146
Uconnect® GPS NAVIGATION CONTENTS GENERAL NOTES ..... .139 ▫ POI Nearby Destination ....146 ▫...
You have full responsibility and assume all risks When you input a destination, the navigation system related to the use of the Uconnect features and uses map data from the hard disk drive to quickly applications in this vehicle. Only use Uconnect when calculate a route.
140 Uconnect® GPS NAVIGATION 2. Push the NAV button on the faceplate to switch to the System Limitations navigation menu and toggle between Map Viewer and The map data that is included with your system is the Navigation Main Menu.
Page 152
Uconnect® GPS NAVIGATION 141 New Destination Point of Interest Press this button on the touchscreen when you want to Press this button on the touchscreen when you want to program a destination. (See the Destination Input section route to a point of interest. (See the POI section for for details).
142 Uconnect® GPS NAVIGATION Where Am I Now? Press this button on the touchscreen when you want to find out where you are, and when you need to search for an available point of interest near your current vehicle position. (See the Where Am I Now section for details).
Uconnect® GPS NAVIGATION 143 IMPORTANT NOTE: Use the space symbol as a space DESTINATION INPUT BY POI between words (e.g., NEW_YORK_CITY). The Point of Interest database allows you to select a destination from a list of locations and public places, or NOTE: points of interest (POI).
144 Uconnect® GPS NAVIGATION A point of interest (POI) can be found in different ways; Close to the current vehicle position (POI Local Area), close to the currently active destination (Nearby Destina- tion), within the map database (POI in Map Area), by POI name, by phone number, and within a city.
Page 156
Uconnect® GPS NAVIGATION 145 NOTE: NOTE: Nearest POI can also be found by simply selecting Some categories may be disabled while the vehicle is in “Point of Interest” instead of the “Where Am I Now?” motion. button on the touchscreen.
146 Uconnect® GPS NAVIGATION 3. Select one of the Gas Stations from the list and confirm 1. While the system is in guidance mode, press the your route by pressing the GO button on the touch- OPTIONS button on the touchscreen.
Uconnect® GPS NAVIGATION 147 POI In Map Area To select a POI from anywhere on the navigation data- base map area, select Point of Interest in the NAV – Main Menu screen. 3. Press the Find POI Near destination button on the touchscreen and select a category.
148 Uconnect® GPS NAVIGATION For easier access to POIs while the vehicle is in motion, POI By Type you may define your own POI category list. To select a POI by type, select Point of Interest in the NAV – Main Menu screen, then press the Select Type from List button on the touchscreen.
Page 160
Uconnect® GPS NAVIGATION 149 The Favorite POIs screen shows the available categories. Select CLEAR ALL to delete all categories from the list. 2. You may select ADD to add more categories. Edit a category button on the touchscreen by pressing the...
150 Uconnect® GPS NAVIGATION Press the New Destination button on the touchscreen to Destination Input get to the Destination Input Screen Push the NAV button on the faceplate to access the NAV Main Menu. NOTE: Once you start the destination input you can press the CANCEL button on the touchscreen to cancel the des- tination input process.
Uconnect® GPS NAVIGATION 151 Use Favorite Place and Address Book to access previ- Overview Destination Entry Screen ously saved addresses or locations. Review the Address Book section in this manual to learn more about the address book. Point on Map allows quick and easy selection of a destination directly from the Map screen.
152 Uconnect® GPS NAVIGATION Intersection allows you to enter two street names. Use City Center if you want directions to a particular city. The navigation system will calculate a route with the destination at the center of the city. Geo Coordinates: A geo coordinate is a coordinate used in geography.
Uconnect® GPS NAVIGATION 153 1. If the COUNTRY is not set to USA, press COUNTRY, Changing State/Province And/Or Country and press the USA button on the touchscreen for this If your destination is not in the displayed state and/or example.
Page 165
154 Uconnect® GPS NAVIGATION Enter W into the speller and select WASHINGTON D.C., DC from the list. Once selected, a CHANGE button on the touchscreen will appear in the lower right corner of the screen. Press CHANGE to confirm your selection.
Page 166
Uconnect® GPS NAVIGATION 155 4. Press the LIST button on the touchscreen to display a list If you press the CONTINUE button on the touchscreen of possible street names. Select CONSTITUTION AVE without entering a number, the navigation system will NW from the list to get to the Input Number menu.
156 Uconnect® GPS NAVIGATION • Pressing the Option button on the touchscreen while in the Confirm Screen will also allow you to select alternative routes. You will have an option to choose 1 of 2 quickest routes or 1 of 2 shortest routes (depending on the route method currently selected).
Page 168
Uconnect® GPS NAVIGATION 157 2. For this example press the Within KENTUCKY button on the touchscreen. 5. Press the Enter Name of Street 2 button on the touchscreen to enter the second street. The navigation radio will display a list of possible cross streets of the 3.
Page 169
158 Uconnect® GPS NAVIGATION 6. Select “Bridwell Dr” for this example. If you wish to change your mind and prefer to select a different cross street, you can press the button on the touchscreen with the cross street name to select another...
Uconnect® GPS NAVIGATION 159 7. Press CONTINUE to confirm the intersection and press GO in the Confirm Route To screen to start the route guidance. NOTE: If the first street of the intersection was not entered accurately, the second street may not be found.
160 Uconnect® GPS NAVIGATION Destination Input By Favorite Places Press the Favorite Places button on the touchscreen in the Destination Entry Menu. NOTE: The Favorite Places button on the touchscreen is dis- abled if the favorite places memory is empty. To fill the...
Uconnect® GPS NAVIGATION 161 Press the EDIT LIST button on the touchscreen to delete either all or single entries off the Favorite Places list. To exit the Edit Favorite Places menu press the EXIT button on the touchscreen. To go back to the Main Menu press the back button on the touchscreen in the upper left corner of the screen.
162 Uconnect® GPS NAVIGATION Destination Input By Point on Map This feature allows quick and easy selection of a destina- tion directly from the map screen. By selecting a street segment or POI icon, you can quickly enter a destination without the need to input the city name or street.
Uconnect® GPS NAVIGATION 163 Destination Input By Saved Trails Press the Saved Trails button on the touchscreen in the Destination Entry menu. NOTE: The Saved Trails button on the touchscreen is disabled if the trails memory is empty. To fill the trails memory, you must save a trail.
164 Uconnect® GPS NAVIGATION Press the EDIT LIST button on the touchscreen to delete Destination Input By Recent Places either all or single entries off the recent destination list. To Press the Recent Places button on the touchscreen in the exit the Edit Recent Destinations menu press the EXIT NAV Main Menu.
Page 176
Uconnect® GPS NAVIGATION 165 The radio will respond: “for Michigan. Please say the 7. Wait for the beep and say NO. name of the street.” The radio will respond: “Now, do you want to start route guidance?” 3. Wait for the beep and say, LOLLY POP STREET (example).
166 Uconnect® GPS NAVIGATION Guide Me Home Press the Guide Me Home button on the touchscreen in the NAV - Main Menu, and press the GO button on the touchscreen to confirm the route to the home address saved in the address book.
Press the CALL 911 button on the touchscreen to dial 911 3. Read and confirm the disclaimer. with a cellular phone connected via Uconnect® Phone. See the Uconnect® Phone section in this manual for more information on Uconnect® Phone.
168 Uconnect® GPS NAVIGATION Record New Trail The trail function is a feature that allows you to log and save a trail in non-digitized areas. NOTE: It is recommended to start the trail into a non-digitized area from a digitized road.
Page 180
Uconnect® GPS NAVIGATION 169 3. Press the Stop Trail button on the touchscreen to stop the trail recording. The Record Trail button on the touchscreen will switch to the Stop Trail button on the touchscreen and the trail appears as a yellow line on the map screen while you •...
Page 181
170 Uconnect® GPS NAVIGATION 6. Press the EXIT button on the touchscreen to save the trail recording without changing the name. The trail recording is now saved in the Saved Trails Memory. NOTE: • You can save up to 12 trails. If the trail memory is full, you must discard one of the previous re- corded trails in order to record a new trail.
Uconnect® GPS NAVIGATION 171 Press the Saved Trails button on the touchscreen. Route Guidance to a Recorded Trail The Saved Trails Memory is accessible in the Destination Entry menu. The route guidance will allow you a choice to route to the start or end of the pre-recorded trail.
Page 183
172 Uconnect® GPS NAVIGATION You may press the EDIT button on the touchscreen to Once you arrive at the destination (green dot, destination change the trail name or to delete trails from the My icon), the route guidance will end.
Uconnect® GPS NAVIGATION 173 ROUTE GUIDANCE After starting route guidance, the system calculates the route and announces: “Follow the arrows on the display.” You will receive navigation recommendations by voice messages and screen displays. You may now follow the trail on the screen. The trail will be displayed until you press the STOP TRAIL button on the touchscreen in the Navigation Main Menu.
174 Uconnect® GPS NAVIGATION Press the Turn by Turn button on the touchscreen to Navigation View Settings display turn arrows and intersection zooms on the right Push the MENU button on the faceplate to select the half of the screen.
Uconnect® GPS NAVIGATION 175 • Press the Next Turn Info button on the touchscreen to Map Items show or hide the next turn button on the touchscreen Press the Map Items button on the touchscreen in the and the next turn information bar.
Uconnect® GPS NAVIGATION 177 Press the icon button on the touchscreen to show or hide Repeat Navigation Announcement an icon on the map. Press the RPT button in the upper right corner of the navigation screen to hear the current navigation an-...
178 Uconnect® GPS NAVIGATION Automatic Re-Routing If you miss a turn while navigating, the navigation radio will automatically adjust your route. Route Options After pressing the OPTIONS button on the touchscreen in the Route Guidance Menu, the following information is displayed: In the left half of the screen, the current position and the current routing method are displayed.
Uconnect® GPS NAVIGATION 179 The Destination Info button on the touchscreen displays destination information. The View Turn List button on the touchscreen lists streets utilized for the current route. Press the Save Destination to save the destination ad- dress. The Change Method button on the touchscreen will allow you to change the routing method.
180 Uconnect® GPS NAVIGATION Unverified Navigation Database Area Unverified areas are roads that are included in the database but have not been verified. Route guidance in an unverified area is different from the guidance you receive in a detailed, verified area. When...
Uconnect® GPS NAVIGATION 181 lot, garage, etc., that is not contained on the digital street Notes On Route Guidance map. The arrow indicates the actual geographic direction During navigation you will receive voice recommenda- to the destination. tions to help guide you. The following explains some guidance messages you may receive.
Page 193
182 Uconnect® GPS NAVIGATION “Follow the road.” - You should continue driving on the “Take the second exit to the right.” - This means to pass current road for the distance shown. the first exit after this announcement is given.
Uconnect® GPS NAVIGATION 183 NAVIGATION OPTIONS Options Before Activating The Route Guidance Before confirming the route with the GO button on the touchscreen, it is possible to select options different from the default route settings. Press the OPTIONS button on the touchscreen in the Confirm Route screen to get to the NAV Options screen.
Page 195
184 Uconnect® GPS NAVIGATION Press View Route Choices to view alternate routing. Press the Destination Info button on the touchscreen in the NAV Options menu to find a map of the destination area, the complete address or coordinates of your desti-...
Page 196
Uconnect® GPS NAVIGATION 185 Press Simulate Route to simulate the route. Use the page buttons on the touchscreen to scroll through Press View Turn List to see a list of turns on the route. the list of turns. The turn buttons on the touchscreen display the length of the route segment, direction of turn, and the name of the street.
Page 197
186 Uconnect® GPS NAVIGATION The turn will be displayed in the center of the map. Press Press the Avoid This Road button on the touchscreen to the NEXT TURN button on the touchscreen to show a avoid the selected turn in the list. The route will be map of the area close to the next turn in the turn list, press re-calculated, if an alternate route is possible.
Page 198
Uconnect® GPS NAVIGATION 187 Press the Find POI Near Destination button on the touchscreen to exchange the destination with a POI near to the desired destination. Read more about POI in the POI section of this manual. After you press one of the method buttons on the...
188 Uconnect® GPS NAVIGATION Options During Route Guidance During active route guidance the View Route Choices and Simulate Route buttons on the touchscreen are replaced by the Take Detour and Find Nearby POI buttons on the touchscreen. Select a distance and press the GO button on the touchscreen to confirm.
Uconnect® GPS NAVIGATION 189 NAVIGATION DEFAULT SETTINGS Set Measurement Metric/US Press the NAV Settings button in the Navigation - Main Menu to select the preferred measurement, set default routing method, view GPS information, and adjust guid- ance prompt volume. From the Navigation Main Menu press NAV Settings and...
190 Uconnect® GPS NAVIGATION Mark or unmark route parameters and then press the Set Default Routing Method SAVE button on the touchscreen (not shown) to confirm the changes. Push the NAV button on the faceplate to cancel without change. NOTE: Avoiding freeways, toll roads, tunnels or ferries may result in very long routes.
Uconnect® GPS NAVIGATION 191 Push the NAV button on the faceplate to exit to the NAV - GPS Information Main Menu. Guidance Prompts The GPS Information menu displays Current Location, Coordinates in degrees, minutes and seconds (press the DECIMAL button on the touchscreen to switch to Deci-...
192 Uconnect® GPS NAVIGATION Press the SAMPLE VOL button on the touchscreen to listen to the current volume setting. Once satisfied with the volume, press the SAVE button on the touchscreen to save the settings. Press the CANCEL button on the touchscreen to exit the menu without saving the settings.
Uconnect® GPS NAVIGATION 193 Map Zoom Level Map Orientation Press the Zoom button on the touchscreen to change the Press the button on the touchscreen with the compass zoom level. arrow to toggle between a map oriented to the North, or oriented parallel to the vehicle heading.
194 Uconnect® GPS NAVIGATION Route Lines STOP OVER The navigation radio displays recorded trail lines as yellow lines on top of the road map. (See Record New Trail section for more details.) Suggested routes are displayed as bright green lines on top of the road map when the route guidance is active.
Uconnect® GPS NAVIGATION 195 Press the ADD button on the touchscreen to confirm the TRIP PLANNER stop over destination. If you are traveling to multiple destinations, the My Trip function will allow you to calculate and save the route to NOTE: each destination.
Page 207
196 Uconnect® GPS NAVIGATION 2. Press the PLAN NEW TRIP button on the touchscreen to start a new trip. 4. Press ADD DESTINATION. 3. Name the trip and press the SAVE button on the 5. Enter a destination (see section Destination Input in touchscreen.
Page 208
Uconnect® GPS NAVIGATION 197 In the Confirm Destination screen: NOTE: 6. Press the SAVE button on the touchscreen to add the You can add up to eight destinations to a trip. The destination to the list. display shows the Itinerary is FULL message in the status line if all eight destinations are used.
Page 209
198 Uconnect® GPS NAVIGATION 8. You may now either PLAN NEW TRIP, DELETE ALL 9. Press a destination button on the touchscreen to get your trips, or select your trip by pressing the button on the destination information, or press the START THIS the touchscreen with the desired trip name.
Page 210
Uconnect® GPS NAVIGATION 199 In the Edit Trip menu you may rename, delete, or edit the You may now Change Name or Change Address. details of this trip. Press a destination in the list. Press the EXIT button on the touchscreen to confirm your From the Edit Trip menu press the desired destination changes.
200 Uconnect® GPS NAVIGATION Press the Modify Input Order button on the touchscreen SiriusXM TRAFFIC BY SiriusXM SATELLITE in the Edit Address Info menu to rearrange the order of RADIO the destinations in the trip. The SiriusXM Traffic service is a specific application that works with your vehicles navigation system.
Page 212
Uconnect® GPS NAVIGATION 201 SiriusXM Traffic features all of this at the push of a button: 1. Coverage of nearly 1 million miles of roadways na- tionwide. 2. Alerts on major accidents, construction and road clos- ings. 3. 24/7 coast-to-coast traffic information delivered by our satellites.
202 Uconnect® GPS NAVIGATION • A transparent red line indicates an average driving 2. Press the SiriusXM Traffic button on the touchscreen to speed is less than or equal to 20% of the speed as given display the available traffic messages.
Page 214
Uconnect® GPS NAVIGATION 203 The information is transferred to the Traffic Information Press Map to see the location of a message on a map. service provider, who then generates the Traffic messages Press PREVIOUS or NEXT to step through the list of that are sent by SiriusXM to the vehicle.
204 Uconnect® GPS NAVIGATION The Traffic icon in the upper right corner of the Switching SiriusXM Traffic On Or Off screen indicates that the Traffic receiver is on. The 1. Push the MENU button on the faceplate on the right green icon indicates an active subscription, the side of the radio.
Uconnect® GPS NAVIGATION 205 Dynamic Route Guidance Ongoing route guidance will change your route based upon the traffic information received. The AUTO mode will make these changes automatically; the MANUAL mode will ask for each traffic event. SiriusXM Traffic Legend The navigation radio can display icons on the map when the SiriusXM Traffic function is active.
206 Uconnect® GPS NAVIGATION The address book is organized in folders. ADDRESS BOOK • The HOME folder contains only your home address. Overview Press this folder button on the touchscreen to edit your The address book provides a way to organize and store home address.
Uconnect® GPS NAVIGATION 207 • The Default Folder contains contacts which are avail- Entering/Editing/Deleting An Address able whenever the vehicle is not in motion. Press the 1. Press Menu to access one of the menus. Default Folder button on the touchscreen to add, edit, delete, and route to your contacts.
Page 219
208 Uconnect® GPS NAVIGATION 3. Press My Address Book button on the touchscreen to The Address Book screen appears. get to the Address Book menu. 4. To select an address from the Default folder, press the Default Folder button on the touchscreen.
Page 220
Uconnect® GPS NAVIGATION 209 5. Press the ADD button on the touchscreen to add a new contact. Press CLEAR ALL to delete all contacts in this folder, press EXIT to go back to the Address Book menu, or press a button on the touchscreen with a contact name to view, edit, or change the Contact Information.
Page 221
210 Uconnect® GPS NAVIGATION You may now create a new contact or copy a contact from another folder. 6. Press Create New Contact to go to the next screen. You may now edit the contact information. Add a voice tag for the voice recognition or press the Edit Contact button on the touchscreen to add more information to the entry.
Page 222
Uconnect® GPS NAVIGATION 211 10. Once the destination is entered, press the SAVE In this example, we need to add an address to the contact. button on the touchscreen to confirm the address. 9. Press Add Address and enter a destination (refer to In addition, you may enter a phone number by pressing Destination Input section in this manual).
212 Uconnect® GPS NAVIGATION Search A Contact In The Address Book 1. Press the SEARCH button on the touchscreen in the Address Book menu. 4. Press the B. Jeffries button on the touchscreen from the results list to select the contact.
Page 224
▫ Radio ......215 ▫ Uconnect® Phone .....217 ▫...
214 SYSTEM INFORMATION Push the MENU button on the faceplate on the right side USER DATA BACKUP of the radio and press the System Setup button on the Contact your local authorized dealer for information on touchscreen to access the System Setup menu. how to backup or transfer your user data, such as address book entries, music files, etc., before returning or chang- Press the System Information button on the touchscreen...
SYSTEM INFORMATION 215 Map Updates Disc Q: The radio does not display the information for the disc Navigation map database updates are periodically made I inserted. How do I access this information? available, when feasible and appropriate, to customers. A map database update is either made available from A: The radio will search the internal Gracenote®...
216 SYSTEM INFORMATION iPod®/Digital Device Control Navigation Q: I cannot copy the iTunes library songs from my iPod® Q: I entered the wrong home address. How can I change to the HDD. A: That is correct. iPod® does not allow iTunes library A: Go to My Files, then Address Book.
SYSTEM INFORMATION 217 Uconnect® Phone DVDC Digital Versatile Disc Changer Q: My phone does not pair to the radio. How do I know A position determined from terres- if my phone is compatible? trial, electronic, or astronomical data. Gracenote Media...
Page 229
218 SYSTEM INFORMATION The .M4A format is actually the RBDS Radio Broadcast Data System audio layer of (non-video) MPEG 4 SiriusXM Satellite Radio movies. Speech Dialog System The .M4P format is an audio file Traffic Message Channel purchased from Apple’s Music Store VES™...
Page 230
15UC730-526-AD Fourth Edition Uconnect 730N ® FCA US LLC Printed in the USA...