Vertex Standard VX-1700 Series Service Manual page 27

Common Menu
A1A (CW) FUNCTION PARAMETERS
This parameter programs the various configuration
items of the A1A (CW) mode.
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver's set
("menu") mode.
The available parameters are: CW Delay, CW QSK,
Side Tone SET, and Side Tone Level.
CW DELAY
This parameter sets the CW delay time.
To program the delay time, double click the left
mouse button on this column, then enter the de-
sired delay time from the keyboard, then press
the [ENTER] key to accept the new delay time.
The available values are "30mSec" to "3000mSec,"
(10 mSec multiples) and "FULL."
To enter the "FULL" option, double click the left
mouse button on this column, enter "0" from the
keyboard, then press the [ENTER] key to accept
the new delay time.
C
OMMON
M
ENU
"A1A ( CW ) F
CE77 PC Programming Software
CW QSK
This parameter sets the delay time between the
instant when the telegraph key is closed (key
down) and the moment the actual carrier enve-
lope is transmitted.
The available values are "10mSec" to "30mSec"
(5 mSec multiples).
SIDE TONE SET
This parameter defines whether the CW side tone
level is linked to the front panel's VOL knob
("LINK"), or not linked ("FIX").
SIDE TONE LEVEL
This parameter sets the CW side-tone (monitor)
level.
To program the CW side-tone level, double click
the left mouse button on this column, enter de-
sired side-tone volume level from the keyboard,
then press the [ENTER] key to accept the CW side
tone level.
When the "SIDE TONE SET" parameter is set to
"FIX," the available selections are "0" to "100."
When the "SIDE TONE SET" parameter is set to
"LINK," the available selections are "-100" to
"100."
" P
UNCTION ARAMETERS
27