Table of Contents
Advertisement
Service Journal
Action
Delivery Service
1. Charge the battery.
2. Mount the rear wheels.
3. Adjust the tire pressure of all wheels to 1 bar (15 PSI).
4. Mount the steering controls in the normal position.
5. Connect the lever to the seat stop.
6. Connect the contact box to the cable for the seat's
safety switch.
7. Mount the arm rests on the seat's back support.
8. Check that the right amount of oil is in the engine.
9. Check that the right amount of oil is in the hydraulic tank.
10. Adjust the position of the steering controls.
11. Fill with fuel and open the fuel tap.
12. Connect the exhaust fumes extractor.
13. Start the engine.
14. Check that there is drive to both wheels.
15. Vent the hydraulic system if necessary.
16. Check the mower deck adjustment.
17. Check:
The safety switch for the parking brake.
The safety switch for the mower deck.
The safety switch in the seat.
The safety switch in the steering controls.
Parking brake functionality.
Driving forward.
Driving backward.
Engaging the blades.
18. Check the idle speed 1550±50 rpm.
19. Check the engine speed 2950±75 rpm
46
English-
SERVICE JOURNAL
Date, mtr reading, stamp, sign
Advertisement
Table of Contents
