Table of Contents
Advertisement
The oil level shall lie between the markings
on the dipstick. If the level is approaching the
"ADD" mark, top up the oil to the "FULL" mark
on the dipstick.
Never fill to above the "FULL" mark.
The oil is topped up through the hole the
dipstick sits in.
Use engine oil SAE 30 or SAE 10W-30 or,
alternately, 10W/40, class SC–SH
(over 0 °C/+32 °F).
Over +20 °C/+68 °F SAE 40 can be used.
Use engine oil SAE 5W-20, class SC–SH
(under 0 °C/+32 °F).
The engine holds 1.5 liters of oil excluding
the filter (including filter 1.7 liters).
4. Throttle and Choke Cables, Lever
Bearings
Lubricate the cable ends by the carburetor
with the oilcan. Move the controls to the end
points and lubricate again.
The throttle cable is also lubricated by the
control when the control console is removed.
36
English-
LUBRICATION
The dipstick markings
Engine oils
Throttle and choke cables by the carburetor
8009-159
8009-140
8011-605
Advertisement
Table of Contents
