Usb Charge - Sylvania SCR1986BT Instruction Manual

Playing Audio through Bluetooth
1. After successfully pairing to a device, use the native controls on the connected
Bluetooth device to select a track
2. To play or pause the selected track, use the native controls on the connected
Bluetooth device, or the PAIR BLUETOOTH / PLAY / PAUSE BUTTON on the unit.
3. To skip forward or back on the select track, use the native controls on the
connected Bluetooth device or the SKIP / TUNE buttons on the unit.
4. Audio played through the connected Bluetooth device will now be heard t
hrought the speakers.
Using the Audio Input
Require a 3.5mm audio cable (not include).
1. Connect a 3.5mm audio cable to the AUX IN JACK on the rear of the unit and
the audio output on an audio device.
2. Press the POWER / SOURCE BUTTON to turn the unit on.
3. Press the POWER / SOURCE BUTTON to switch to AUX IN mode.
4. Use the native controls on the connected device to play your audio
through the unit.

USB CHARGE

1. Make sure the unit is plugged into the wall
2. Using the appropriate USB charging cable (not included), connect one
end to the device and the other to the USB Charger on the unit.
Refer to the user's manual for your specific device for manufacturers
required charging amperage as well as determining the appropriate cable
for your device before charging.
Note: This device uses a USB charging port with a 1000mA maximum
charging capacity, making it unsuitable for charging iPads.
3. The device will now charge.
8