Page 1
BLUETOOTH CLOCK RADIO SCR1989BT-PL OPERATING INSTRUCTIONS Please read and follow this instruction manual carefully before using the unit and retain it for future reference SYLVANIA is a registered trademark of OSRAM...
SAFETY INSTRUCTIONS WARNING: IF CONNECTED TO AN AC OUTLET: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, IF AND AS APPLICABLE TO THE APPLIANCE, STATEMENTS THAT CONVEY TO THE USER THE INFORMATION ITEMIZED IN THIS PARAGRAPH: 1.
COMPLIANCE WITH FCC REGULATIONS This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 4
FUNCTIONS AND CONTROLS Clock Setting / Preset Station Button CLK/MEM - / HR - Clock-Alarm Setting/Preset Station decrease/Tunning decrease / MIN - Clock-Alarm Setting/Preset Station increase/Tunning increase Adjust the LED screen brightness / In Bluetooth mode, Switch between DIMMER - Play and Pause Volume decrease (From Level 16 to Level 1) / Alarm2 ALM 2/VOL-...
Page 5
AC OPERATION 1. Connect the AC Power Cord to a wall outlet with AC120V/60Hz power supply. Time Setting 1、In standby mode, press CLK/MEM button to enter into clock setting mode, again press CLK/MEM button for 2-3 seconds, time digital blinking, then press HR/MIN buttons to set the time, and press CLK/MEM button to confirm.
VOL-/VOL+ button to adjust volume, press MIN button to move next or HR button to move previous, press PLAY/PAUSE button to play or pause the music. Bluetooth device name: SCR1989BT-PL AUX IN Convert the power button to AUX IN mode, then the green LED will display “AUX”.