Honda 1994 Prelude Online Reference Owner's Manual page 33

Seat Belt Reminder
Light
This indicator lights when you turn
the ignition ON (II). It is a reminder
to you and your passengers to
protect yourselves by fastening the
seat belts. A beeper also sounds if
you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the
beeper stay off if you fasten your
seat belt before turning on the
ignition.
Charging System
Indicator
This light indicates the battery is
not being charged. It should come
on when the ignition is ON (II), and
go out after the engine starts. If
this light comes on while driving,
the battery is not being charged.
Turn to page 198 for information
about what to do.
Low Oil Pressure
Indicator
This indicator lights when the oil
pressure in the engine drops low
enough to cause damage. It should
light when the ignition is ON (II)
and go out after the engine starts.
If this light comes on when the
engine is running, there is a possi-
bility of serious engine damage.
Safely pull to the side of the road
and shut off the engine as soon as
you can. Turn to page 197
structions and precautions on
checking the engine.
US Canada
BRAKE
This light has two functions:
1. It lights as a reminder that you
have set the parking brake.
Driving with the parking brake
set can damage the brakes and
tires, and cause the Anti-lock
brake system to turn off (see
page 118).
2. It can indicate the brake fluid
level is low if it remains lit after
you release the parking brake or
comes on while driving. This is
normally due to worn brake pads.
Have your dealer check the
braking system for worn pads or
fluid leaks.
for in-
Instruments and Controls
Indicator Lights
Parking Brake
and Brake
System
Indicator