Table of Contents
Advertisement
OIL DRAIN BOLT
2. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt from the bottom of the
engine. Drain the oil into an
appropriate container.
OIL FILTER
WASHER
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
4. Install a new oil filter according
to instructions that come with it.
5. Put a new washer on the drain
bolt, then reinstall the drain bolt.
Tighten it to:
40 N . m (4.0 kg-m , 29 Ib-ft)
Engine Oil
6. Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
(US: S, Canada: S)
3.8
(4.0 US q t , 3.3 Imp qt)
(US: Si, 4WS, Canada: SR, SR 4WS)
4.3
(4.5 US q t , 3.8 Imp qt)
(US: VTEC, Canada: SR-V)
4.8
(5.1 US q t , 4.2 Imp qt)
7. Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out
within five seconds. If it does not,
turn off the engine and reinspect
your work.
8. Let the engine run for several
minutes and check the drain bolt
and oil filter for leaks.
Maintenance
CONTINUED
Hide quick links:
Advertisement
Table of Contents
