Honda 1994 Prelude Online Reference Owner's Manual page 185

JACKING
POINT
9. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded
into the underside of the body.
Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the
jack contacts the jacking point.
Make sure the jacking point tab
is resting on the jack notch.
WHEEL EXTENSION
WRENCH
10.Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the
ground.
Changing a Flat Tire
11.Remove the wheel nuts and flat
tire. Temporarily place the flat
tire on the ground with the
outside surface of the wheel
facing up. The outside surface
contacting the ground could
damage the wheel surface.
Taking Care of the Unexpected
CONTINUED