Honda 1994 Prelude Online Reference Owner's Manual page 167

5. Push the bulb holder into the
turn signal assembly and turn it
clockwise until it locks.
6. Test the turn signals to make
sure the new bulb is working.
7. Put the turn signal assembly into
the bumper. Make sure the tab
on the turn signal assembly fits
into the bumper slot. Tighten the
mounting screw.
Replacing a High-mount
Brake Light Bulb
(US: S, Si, Canada: S, SR)
COVER
1. Remove the cover by pulling it
down and sliding it forward.
2. Determine which bulb is burned
out.
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Test the lights to make sure the
new bulb is working.
5. Reinstall the cover by sliding it
into position and pushing it up.
Maintenance
Lights