Honda 1994 Prelude Online Reference Owner's Manual page 165

4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
lens. Turn it clockwise to lock it
in place.
6. Turn on the parking lights to
make sure the new bulb works.
7. To reinstall the light assembly in
the fender, line up the fingers on
the light assembly with the holes
in the fender. Push the light
assembly straight back.
8. Install the mounting screw and
tighten it securely.
Replacing a Front Side
Marker Light Bulb
SCREW
1. Use a Phillips-head screwdriver
to loosen the side marker assem-
bly's mounting screw.
2. Remove the side marker assem-
bly from the bumper.
FRONT SIDE
MARKER
BULB HOLDER
ASSEMBLY
3. Remove the bulb holder from the
side marker assembly by turning
it one-quarter turn counterclock-
wise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Maintenance
Lights
BULB
CONTINUED