Baby Lock Destiny BLDY Instruction And Reference Manual page 177

CREATING BOBBIN WORK (EMBROIDERY)
b
It is necessary to move to the beginning of
stitching so press
→ The embroidery frame moves to the beginning of
stitching.
c
Press .
→ The screen changes, and all keys and operation
buttons are locked.
d
Using the presser foot lever, raise the
presser foot.
e
To bring the bobbin thread above the
fabric, rotate the handwheel
counterclockwise while holding the upper
thread.
f
As shown below, pull the upper thread
slightly to the left pulling the bobbin thread
up through the fabric.
a Upper thread
b Bobbin thread
370
, and then press .
Memo
• If the bobbin thread cannot be pulled up,
use an awl to create small hole to help pull
bobbin thread to surface.
g
Press to unlock all keys and buttons.
h
Lower the presser foot.
i
Press .
j
While holding both the upper thread and
the bobbin thread, sew a section of the
pattern.
k
Stop the machine, and then tie the upper
thread and the bobbin thread together to
secure the threads.
l
Start sewing again to finish the pattern.
m
Raise the needle and presser foot, remove
the embroidery frame, and then cut the
upper thread and the bobbin thread.
When cutting the threads, be sure to leave an
adequate length of thread so they can be