d
After the pattern is sewn, remove the fabric
from the frame, and then measure the
distance that the pattern is to be slid.
a Vertical: 32.8 mm
b Horizontal: 42.8 mm
■ Trial Sewing
Sew trial embroidery to check that the pattern will
be slid the correct distance.
a
Select the pattern, and then continue to the
sewing screen.
b
Press
and then, press
sewing screen.
c
Embroider the first pattern.
d
h
Refer to steps
through
"Connecting Three Patterns" on page 307
to select the next pattern.
e
in the
k
of
CONNECTING ROTATED PATTERNS
Specify the position of the second pattern
referring to the vertical/horizontal position
d
measured in step
of "Measuring the
Distance That the Pattern Will Be Slid" on
page 318. Press
position.
a Connecting point
a
a Connecting point
b Vertical/Horizontal position
→ Message appears on screen and carriage will move
after pressing
.
after specifying the
a
a
b
319
6