Dditional Cautions; Ervice Materials Available From Artin - Martin MAC 500 Service Manual

1 . 3 A
D D I T I O N A L C A U T I O N S
1 . 3 . 1 E
L E C T R O S T A T I C D I S C H A R G E
The following parts are classified as ESD sensitive:
• Motherboard PCB and the individual ICs.
• Keyboard/display PCB and the individual ICs.
• Hall-sensors.
To avoid damaging ESD sensitive parts:
• Ensure that you and your tools have the same potential (ground) as the fixture before and when handling any of the above
components.
• Always store PCBs in antistatic (electrically conducting) bags and store ICs in antistatic foam.
• Always power off the fixture, and allow capacitors do discharge before removing or inserting any components on the PCBs.
1 . 3 . 2 I
N D U C T I V E L O A D S
Always power off the MAC 500 before connecting or disconnecting any of the step motors. Otherwise, damage to the motor
drivers may occur.
1 . 4 S
E R V I C E M A T E R I A L S A VA I L A B L E F RO M
1 . 4 . 1 P
R O T E C T I O N D E V I C E S
• UV protection glasses, clear .....................................................................................................402010
• ESD table mat, 750 x 610 mm...................................................................................................402020
• Snap button connector, female, type 4730, for ESD table mat....................................................402022
• ESD ground (earth) wire w/2 banana sockets, 4710 ..................................................................402023
• Adjustable ESD wrist band........................................................................................................402024
• Spiral wire for ESD wrist band...................................................................................................402025
• Antistatic bag, 200 x 300 mm ....................................................................................................453801
• Antistatic bag, 100 x 125 mm ....................................................................................................453802
1 . 4 . 2 T
O O L S
• 2 mm T-shaft allen key ..............................................................................................................402001
• ESD IC pin straightener combi ..................................................................................................402030
• Light duty maintenance tool for AMP MTA 100 sockets ..............................................................402011
• Heavy duty pistol grip for AMP MTA 100 sockets (requires head, below) ....................................402012
• Heavy duty termination head for AMP MTA 100 sockets (requires grip, above)...........................402013
1 . 4 . 3 L
U B R I C A N T S
• High temperature synthetic oil, 0.5 liter .....................................................................................400003
• Silicone lubricant, 0.5 liter.........................................................................................................400119
• Silicone lubricant, 0.2 liter in dispenser with closable valve .......................................................400118
1 . 4 . 4 A
D H E S I V E S
• High temperature (300 - 375° C) silicone glue, red ....................................................................400002
• Loctite 243 thread lock, 10 ml ...................................................................................................400531
• Loctite 290 thread lock, 10 ml ...................................................................................................400533
1998-08-03
( E S D )
S E N S I T I V E P A R T S
Introduction
M
A R T I N
3