Sceptre E165 Manual page 59

Problems
PICTURE DOES
NOT COVER THE
ENTIRE SCREEN
PICTURE QUALITY
IS HORRIBLE!!
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
I CANNOT CHANGE
THE TIME
MANUALLY
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
THERE IS NOISE
OR TRASH PIXELS
ON THE SCREEN
TIPS FOR HIGH
DEFINITION USERS
TIPS FOR
LETTERBOX
CONTENT USERS
If you're using HDMI or a display digital channel make sure you
use the ASPECT button to switch to 16:9 format. If you are
using VGA, use the AUTO ADJUST function to adjust to the
screen. Please Note: If you are using regular analog display,
AV, or component in 480i resolution, use the ASPECT button to
switch to 16:9 in order to fill up the screen. Please Note: This
note this feature will distort the picture.
For best image quality, view HD widescreen programs where
possible. If HD content is not available view "Standard
Definition" from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your display has
video that is many times better than old TV's and so you can
see interference and deficiencies you did not KNOW you had.
Your display is manufactured using an extremely high level of
precision technology, however, sometimes some pixels of your
display may not display. Pixels defects within industry
specifications are inherent to this type of product and do not
constitute a defective product.
Your display syncs time automatically according to your local
TV channel. This function only works while the display's tuner
is connected to an ANTENNA. (OPTIONAL)
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed captioning
and the box will disappear. Refer to page 38 for more
information.
Different channels and inputs will sometimes have this effect
because the channel signal's own volume is already loud.
There is no way remove this completely. The display has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
When your display's resolution is higher than the digital
channel's broadcast resolution, the signal is up-converted to
match your display's resolution. Up-converting can cause this
type of effect.
The display is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 displays. The display has
the capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
- 59 -
www.SCEPTRE.com
SCEPTRE E165 HD Display User Manual
Solutions