To install the 2 TV feet, attach them to the bottom of the TV and screw in the 4 screws indicated in the picture. Remember the SCEPTRE word on the feet faces the front. To remove them, simply unscrew the 4 screws and the feet will come off.
The following picture offers a suggestion for connecting most of your audio video equipment. TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized distributor or Sceptre Customer Service for further information. (DVD)SR Series P2...
Page 3
Ready to Watch Some TV? (Optional) Starting up the HDTV Make sure your power cable is connected and the standby red light in the front of the TV is lit up. Check all your connection cables off the side or the back of your TV and also your AV devices.
If You’ve Connected Cable or Satellite Set-top Boxes to the HDTV… Press the button on the side of the HD Display or the SOURCE button on the remote control and you will see the picture above. Use ▲▼ buttons to select the source you want to switch to and press the ENTER button in the middle of the ▲▼...
SCEPTRE Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover.
Page 6
This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or satellite tech support. Your TV could contain either remote. Version 1 Version 2 (DVD)SR Series P6...
Page 7
YPRPR – Press this button to switch to the source YPbPr (with green, blue, red, RCA connectors). The following buttons are functions designed to work with the optional, Sceptre Sound Bar. POWER – This button turns on the sound bar.
Page 8
23. ■ – Stop button in DVD mode. 24. REPEAT – Press this button for repeat the program. The following buttons are functions designed to work with the optional, Sceptre Sound Bar. 25. POWER – This button turns on the sound bar.
INSERTING A DVD With the display turned on and the DVD button pressed from the display remote, you can now insert the DVD disc you want to play. When you are facing the front of the display, insert the DVD disc with the side that is labeled with the movie title facing away from you.
For technical help, contact our Technical Support Group via email or phone. Please have your Product Number (P/N), Serial Number (S/N), and date of purchase available before you call. Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST) Tech Support E-mail: SceptreTS@Sceptre.com Customer Service Email: SceptreCS@Sceptre.com TEL : 1800-788-2878...
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.