Sceptre E165 Manual page 14

HEADPHONE – This connection is for headphones to be attached to
7.
the display. This connection works with both 2 ring and 3 ring
connector headphone.
USB – USB connects to USB flash drives for playing music and
8.
picture. The USB port is also used for updating the display's
firmware.
HDMI1-2 – HDMI connects to devices that use HDMI cable, such as
9.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for
cell phones. MHL is a protocol where the display will show what your
cell phone is showing. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the display's source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
Please Note:

This display features a power saving function which will turn off
the display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.

This display does NOT support QAM under the optional
tuner.

This display may or may not come with the optional TV
tuner. Please consult your retailer or our customer service
for further information.
- 14 -
www.SCEPTRE.com
SCEPTRE E165 HD Display User Manual