Table of Contents
Advertisement
DT Etherlink IV
10.
Enter %SN, where SN is the slot number in the Subrack. For DESKTOP1 and Minirack enter
%01. The main menu of the device will be displayed.
Go to the "Fault and maintenance management" menu, means to enter number 2. Enter the
11.
<SOFTUPDATE> command. After typing SOFTUPDATE, the device tries to establish
connection over the X-modem protocol within 60 seconds.
CO_09_FMM>SOFTUPDATE
Flash manufacturer: Silicon Storage Technology(SST)
Flash device: SST39LF/VF016
Start address: 0x1000000
Flash size: 2048 KB
Now upload program via XModem or 1K XModem
C
12. The time counter is started. Select Send File in the "Transfer" menu.
User Manual
- 92 -
Advertisement
Table of Contents
