Table of Contents
Advertisement
DT Etherlink IV
6. Configure the parameters of the COM port (COM properties). Click "Оk".
Bits per second:9600, Data bits: 8, Parity: None, Stop bits: 1, Flow control: None
7. Select Properties in the "File" menu of the HyperTerminal program.
Select the "Setting" tab. Select the VT100 emulation in the "Emulation" menu. Click "Ok".
8.
9. Select Call in the "Call" menu. (If the menu is not available, the connection is established
automatically. Go to item 10.)
User Manual
- 91 -
Advertisement
Table of Contents
