S-Access ETHERLINK IV Technical Description And Operations Manual page 102

DT Etherlink IV
This connector description is only correct with the RS-232 daughter board (attention, the RS-232
daughter board is different than the Nx64 daughter board!).
Available cables:
SA-CAB-DB26-ETH_IV-OPEN
Cable ETHERLINK_IV Universal, DB26MH to Open, 1.0m, UL2464, AWG-26, OD=8mm
SA-CAB-N21-ETH_IV-DCE
Cable ETHERLINK_IV Nx64 to X.21, DB26MH to DB15M, DCE, 1.0m, UL2464, AWG-28, OD=5mm
SA-CAB-N21-ETH_IV-DTE
Cable ETHERLINK_IV Nx64 to X.21, DB26MH to DB15F, DTE, 1.0m, UL2464, AWG-28, OD=5mm
SA-CAB-N35-ETH_IV-DCE
User Manual
Pin No. Signal RS-232
1 DTR
2 DSR
3 CTS
6 DCD
7 RXD
8 RTS
9 TXD
11 PG
12 PG
13 PG
14 SG
15 CC
Description
Data Terminal Ready
Data Set Ready
Clear to Send
Data Carrier Detect
Receive Data
Request to Send
Transmit Data
Protected Ground
Protected Ground
Protected Ground
Signal Ground
Cable is Connected
- 102 -
Direct.
In
Out
Out
Out
Out
In
In
In