Setting The Safe Mode - Pioneer AVIC-F60DAB Operation Manual

System settings
2 Using packing tape or similar, place
markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.
2 m
50 cm
Markings
Markings
3 Press the HOME button to display the
Top menu screen.
4 Touch the following keys in the follow-
ing order.
The "System" screen appears.
5 Touch [Camera settings].
The following screen appears.
6 Touch [Parking assist guide adjust].
The following screen appears.
25 cm
25 cm
Rear bumper
7 Set the guidelines by dragging the four
points.
8 Touch the following keys to adjust the
position of the point if necessary.
Moves the point to the left.
Moves the point to the right.
Moves the point upward.
Moves the point downward.
Extends the line to the left and right
from the current centre point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Shortens the line from the left and right
to the current centre point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Resets the settings of the distance and
Default vehicle width guidelines and adjust-
ment points to the default.
p When a point is moved, the distance from
the initial value is displayed at the bottom
of the screen.

Setting the safe mode

For safety reasons, you can limit the functions
that are available while your vehicle is in mo-
tion.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
Chapter
28
141
Engb