Table of Contents
Advertisement
TM
The Input Submenu
The Input Submenu is used to choose inputs for the tracks, as well as the type and gain of each input. In this
submenu, the Track Keys are first used to select which tracks are having their inputs patched. Once the {patch} or
{group} button has been pressed, the Track Keys are used to patch inputs to the selected tracks.
Digi
Import
Arm
Space
B/Up
Level
Fade
Name
Grab
Takes
Wave
Nudge
Press to patch inputs to se-
lected tracks. Track keys will
flash, indicating that they now
represent inputs. Press one key
to patch that input to all se-
lected tracks, or any two keys
together to patch stereo in-
puts. Releasing the keys makes
the patch and returns the Track
Keys to selecting tracks.
Mono/Stereo
28
Page
Proj
INPUT
ARM
Track
Block
Edit
Press to assign multiple in-
puts to multiple tracks (in
mono only). The tracks are
selected before pressing this
Soft Key. All the Track Keys
flash, indicating that they rep-
resent inputs. Any number of
inputs can be selected simul-
taneously, and upon release
they are patched sequentially
to the selected tracks. If there
are more tracks than inputs,
the inputs "wrap around" to
the beginning again, allow-
ing multiple sets of the same
inputs to be patched to multi-
ple tracks.
This is not selected explicitly, but is simply determined by the number of inputs
patched to the track. When two inputs are patched to a track it will automatically
record stereo clips. It is possible to have some tracks patched for mono recording and
others patched for stereo. It is even possible to patch an input to one track in mono,
and as part of a stereo pair on another track (though they cannot be armed at the same
time).
In the disk recorder, a stereo pair has the following properties as distinct from any pair
of mono tracks:
1.
Editing is always performed on both sides at once.
2.
The output numbers are always a consecutive pair.
3.
If a clip overlaps a stereo clip on the preceeding track, the right hand side of the
stereo clip is not heard.
patch
group
Press to change the gain
on the inputs to the se-
lected tracks. This can
be done with the Jogger
Wheel, the + and - keys,
or the Numeric Keypad.
If you want to type a
negative value, press the
<Clear> key, then <mi-
nus>, and then the
number.
Gain
Type
dB
Press to select
the type of in-
put going to all
selected tracks,
using the Jogger
Wheel or the +
and - keys.
Choices
are
ANLG
-10,
ANLG
+4,
AES/EBU or
SP-DIF.
User Manual
Advertisement
Table of Contents
