TM
42.
Looping means playing through a section, rewinding to the beginning and playing again continuously. To make a
Loop play, press the Loop key.
To set the start and end times for the loop, enter the SET LOOP menu by holding down the Blue key while pressing
the Loop key. Now the From and To keys can be used to set new loop points (if you only set one end of the Loop,
the previous time for the other end will be retained):
In and Out Points
The From and To keys, and their menus, are used to set up the In and Out points for automatic recordings. The use
of these keys is described in the section "Editing with a Range".
User Manual
Looping
To start looping, press the Loop key.
To stop Looping, press any other
transport key.
If you use Auto Record while looping, it
must be activated again for each loop.
127
Page