The Export Menu - Fairlight Prodigy Edit User Manual

TM
29.
The Export menu allows material to be exported from Prodigy Projects into a variety of formats.
dubber file
export exchange
Exports a file to the root of the
current disk drive, which can
be read by Fairlight's DaD
Dubber product. The file will
be named XXX.DL where
XXX.MT is the name of the
currently open Project.
Exports a file to the root of the
current disk drive, which can be
read by Fairlight's File Exchange
partners. The file will be named
XXX.ML where XXX.MT is the
name of the currently open Project.
The CD Submenu
The CD submenu allows one track of stereo (or mono) audio to be written directly to a Yamaha CRW4416S Com-
pact Disc writer (note: this model changes from time to time - please consult your Fairlight distributor if model
unavailable). A range is set up to indicate the start and end of the Compact Disc, which cannot exceed 75 minutes
in duration. The following controls are available on the submenu:
eject
Ejects the CD from
Starts a test write. This will go through the entire write procedure,
the drive.
checking everything works, but will not actually burn a CD. Useful
for saving media if uncertain about the result.
User Manual

The Export Menu

WAV Pro
Export Tools
Opens the WAV Ex-
port submenu, used
for turning audio
into WAV files. See
next page.
test
write
Export
Redbook
MFX
CD
GPI Preroll
ADR Offset
Edit
Loop Mark
Initiates export to a ProTools
file. First you must choose a
destination on the network or
on a local drive, then press
ENTER to begin. All recorded
media are copied to the file.
real
write
GPI
ADR
Edit
Loop
Writes the audio to the
CD at twice real speed.
Edit
Opens the CD
Submenu, used
for outputting an
Prodigy track to
Redbook CD
over SCSI.
Export
MFX
Preroll
Offset
Edit
Mark
105
Page