Hunter Type 2 Series Owner's Manual And Installation Manual page 15

8 • Completing Your Installation With a Bowl Light Fixture (Continued)
8-10. Install light bulbs (40 Watt Maximum) into the
sockets.
8-11. Hold the glass bowl up so it fits in the shroud.
8-12. Hold the cover plate up to the bottom of the glass
bowl and secure them both by screwing the finial into
the threaded rod on the bottom of the light fixture.
8-13. Attach the extra pull chains with pendants (included)
to the light and fan pull chains using the breakaway
connector. (You may find the breakaway connector
on the end of the extra chains.)
Note: In compliance with
Canadian federal energy
regulations, this ceiling
fan contains a device that
restricts its light output.
Exceeding the wattage
limit marked on the MAX
wattage sticker affixed to
the light socket(s) may
result in fire hazard or
improper operation.
Breakaway
Connector
Steps 8-10 – 8-11
15
42489-01 • 02/16/12 • Hunter Fan Company
Step 8-10