1. Manuals
  2. Brands
  3. Hunter Manuals
  4. Fan
  5. Type 2 Series
  6. Owner's manual and installation manual

Hunter Type 2 Series Owner's Manual And Installation Manual

Hide thumbs Also See for Type 2 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Installation Instructions & Owner's Manual
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42489-01
20120216
©2012 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Hunter Type 2 Series

Summary of Contents for Hunter Type 2 Series

  • Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42489-01 20120216 ©2012 Hunter Fan Co.

  • Page 2: Table Of Contents

    8 • Completing Your Installation With a use a solid-state speed control with this fan. Use only Hunter speed Bowl Light Fixture ....13 controls, which are solid state.
  • Page 3 If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
  • Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42489-01 • 02/16/12 • Hunter Fan Company...
  • Page 5 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.

  • Page 6: Getting Ready

    • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...

  • Page 7: Installing The Ceiling Plate

    2-7. Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 8: Assembling And Hanging The Fan

    3-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. 3-5. Place the slots over the hooks to hang the fan. 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 9: Securing Fan To Secondary Support System

    4-8. Return to the fan so you can complete the fan wiring. Step 4-1 Steps 4-6 – 4-7 Steps 4-2 – 4-3 Steps 4-4 – 4-5 3mm (1/8") Support Brace Outlet Box Braided Ceiling Cable 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 10: Wiring The Fan

    5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 11: Installing The Canopy And Canopy Trim

    Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 12: Assembling The Blades

    7-2. Install one blade onto a blade iron with three blade assembly screws. 7-3. Repeat Steps 7-1 7-2 untill all three blades are installed. – Grommet Steps 7-1 – 7-2 Blade Assembly Screw 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 13: Completing Your Installation With A Bowl Light Fixture

    8-4. Install a third housing assembly screw into the remaining screw hole in the shroud. Securely tighten all three screws. 8-5. Install six #6-32 machine screws into the outer holes in the shroud. Step 8-4 Housing Shroud Assembly Screw Step 8-5 42489-01 • 02/16/12 • Hunter Fan Company...
  • Page 14 CAUTION: Make sure the shroud is securely attached to the Assembly switch housing mounting plate. Failure to properly attach and Screw tighten all three assembly screws could result in the switch housing and light fixture falling. 42489-01 • 02/16/12 • Hunter Fan Company...
  • Page 15 Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. Breakaway Connector Steps 8-10 – 8-11 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 16: Fan

    Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. (You will need to remove the Reversing light kit glass to do so.) Restart fan. Switch 42489-01 • 02/16/12 • Hunter Fan Company...

  • Page 17: Troubleshooting

    If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42489-01 • 02/16/12 • Hunter Fan Company...

Table of Contents