Hunter TYPE 2 Installation And Operation Manual
Type 2 models
Hide thumbs
Also See for TYPE 2:
- Owners and installation manual (23 pages) ,
- Owner's manual and installation manual (17 pages) ,
- Owner's manual and installation instructions (16 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE 2 Models
42650-01 • 07/30/07
Advertisement
Table of Contents
Related Manuals for Hunter TYPE 2
Summary of Contents for Hunter TYPE 2
- Page 1 For Your Records and Warranty Assistance Ceiling Fans Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE 2 Models For reference also attach your receipt or a copy of your receipt to the manual. 42650-01 • 07/30/07...
-
Page 2: Table Of Contents
Ceiling Fan ......13 use a solid-state speed control with this fan. Use only Hunter speed 11 • Troubleshooting ....14 controls. © 2007 Hunter Fan Company 42650-01 • 07/30/07 • Hunter Fan Company... - Page 3 Installer’s Choice and Optional Accessories Understanding Mounting and Installer’ s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods. Standard Outlet Box Mounting Considering Optional Accessories Style Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product.
-
Page 4: Getting Ready
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magnetic tip recommended) -
Page 5: Installing The Ceiling Plate
Note: The isolators should be flush against the ceiling. 2-6. Pass the screws through the slotted holes in the ceiling plate into the pilot holes you drilled. Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42650-01 • 07/30/07 • Hunter Fan Company... - Page 6 Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. Low Profile Screw Adapter 3-7. Raise the fan and align the slots in the canopy with the hooks on Low Profile the ceiling plate. Washer 3-8. Place the slots over the hooks to hang the fan. 42650-01 • 07/30/07 • Hunter Fan Company...
-
Page 7: 4 • Setting The Remote Transmitter And Receiver
IMPORTANT! Before you change a jumper, make sure the battery is not connected to the transmitter. CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. -
Page 8: Wiring The Fan
5-7. Run the white antenna wire from the receiver through one of the Small Wire slots in the ceiling plate so that it rests between the ceiling plate Connector and the ceiling. Push it to the edge of the ceiling plate for clear reception. 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 9: Installing The Canopy And Canopy Trim
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 10: Assembling The Blades
7 • Assembling the Blades 7-1. Insert blade through housing before installing grommets [a] in each blade [b]. 7-2. Attach each blade [a] to the fan [b] using two blade assembly screws [c]. Step 7-1 Step 7-2 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 11: Completing Your Installation With A Bowl Light Fixture
8-5. Align the tabs in the globe assembly with the tabs Steps 8-1 - 8-3 in the light kit ring, then lift the globe assembly and rotate to engage the tabs. Make sure all tabs are properly engaged before releasing the globe. Bulb Glass Bowl Steps 8-4 - 8-5 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 12: Operating The Remote Control And Mounting The Holder
9-5. When necessary, replace the battery with a 12-volt type 23A, MN-21 battery or equivalent. 9-6. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Reverse Switch Fan Speed High Fan Speed Medium Fan Speed Fan Off Fan Light Step 9-6 Steps 9-1 – 9-4 Step 9-5 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 13: Ceiling Fan
In warm weather, use downward air flow pattern In cold weather, use upward air flow pattern To Change Airflow Direction Turn the fan off and let it come to a complete stop. Press the reversing switch on the remote. Restart fan. 42650-01 • 07/30/07 • Hunter Fan Company... -
Page 14: Troubleshooting
1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42650-01 • 07/30/07 • Hunter Fan Company...