Related Manuals for Serene Optima S2055
Summary of Contents for Serene Optima S2055
- Page 1 Optima S2055/6 Wall Mount Space Heater with Cooling Fan Installation and Operating Manual...
-
Page 2: Safety Information
Safety Information: When using any electrical appliance, safety precautions should always be observed. Read these instructions carefully and retain for future reference. When used by, or near, young children or infirm persons, close supervision is necessary. Young children should be supervised to ensure that they do not play with the appliance. -
Page 3: Operation
Operation: Air is drawn into the heater through the top and side inlets by a tangential fan, blown over heating elements and then blown out through the bottom louvered grille into the room. The heater is controlled by an electronic controller, incorporating an electronic thermostat and speed control. -
Page 4: Operation Modes
Operation Modes: Your Serene Wall Fan Heater has several selectable modes of operation: NORMAL MODE: This is the default factory mode. In this mode the heater will operate with no timer functionality. 3-HOUR TIMER MODE: The heater is fitted with a 3 hour countdown timer. -
Page 5: Control Functions
Control Functions: POWER BUTTON Touch to the heater. START STOP SPEED INDICATOR To control the fan speed touch the SPEED button repeatedly until the desired fan speed is selected FAN ONLY INDICATOR To set the heater to Fan Only setting, press the FAN symbol until the Green ‘Fan Only’... -
Page 6: Installation
Installation: This appliance must be installed in accordance with the current electrical wiring rules and regulations. The heater/fan must not be located immediately below a socket-outlet. If used as a bathroom heater, the ‘Optima’ must be installed away from wet areas such that the controls cannot be touched by a person in the bath or shower. -
Page 7: Wall Mounting
Wall Mounting: 1. The heater is very simple to wall mount using to screws provided. Remove the heater from the packaging and locate the mounting screws. Measure the distance between the mounting key-hole (372 mm) and mark the wall accordingly. Drill the holes and insert the mounting screws three quarters of their length. -
Page 8: Safety Cut-Out
OFF automatically. Press the POWER button and the heater will operate. Safety Cutout Your Serene Wall Fan Heater is fitted with an auto-reset thermal cutout and a fusible link. Either of these devices will automatically switch off the elements and the motor, should the unit reach an abnormal temperature. -
Page 9: Specifications
Cleaning The heater requires regular cleaning to ensure trouble free operation. Isolate the heater from the mains power supply. Use a damp cloth to clean the exterior of the heater. Do not use any abrasive cleaners. Use a vacuum cleaner to remove dust and fluff visible on the heater inlet and outlet grilles. -
Page 10: Contact Addresses
HONG KONG t: +852 2325 3210 f: +852 2325 3166 info@serene-ind.com www.serene-ind.com 1010, 10th Floor, Block A, Alexander Industrial Bldg., 27,Wing Hong Street, Cheung Sha Wan, Kowloon Serene Industries Limited reserves the right to alter any specifications without notice. | 10...
Need help?
Do you have a question about the Optima S2055 and is the answer not in the manual?
Questions and answers