Table of Contents
Advertisement
Overall Settings for the JD-XA
Menu
Parameter
Value
[Shift]+
Cursor [K] [J]
[-] [+]
Cursor [K] [J]
Switch
OFF, ON
ROOM1,
ROOM2,
STAGE1,
Type
STAGE2, HALL1,
MIC REVERB
HALL2, DELAY,
PAN-DLY
Time
0–127
Level
0–127
Switch
OFF, ON
Input Gain
-15 dB–+15 dB
Low Freq
16 Hz–800 Hz
Low Gain
-15 dB–+15 dB
16 Hz–16000
Mid1 Freq
Hz
Mid1 Gain
-15 dB–+15 dB
Mid1 Q
0.5–8.0
16 Hz–16000
Mid2 Freq
Hz
MASTER EQ
Mid2 Gain
-15 dB–+15 dB
Mid2 Q
0.5–8.0
16 Hz–16000
Mid3 Freq
Hz
Mid3 Gain
-15 dB–+15 dB
Mid3 Q
0.5–8.0
630 Hz–16000
HighFreq
Hz
High Gain
-15 dB–+15 dB
Saving the System Settings
System settings revert to their previous state when you turn off the power. If you
want to keep these settings even after the power is turned off, you must save the
system settings.
1.
Press the [Write] button.
2.
Use the Cursor [K] [J] buttons to select "SYSTEM," and then press the [Enter]
button.
A confirmation message appears.
If you decide to cancel, press the [Exit] button.
3.
Press the [Enter] button.
A screen indicating "Completed!" appears, and the data is saved.
* NEVER turn the power off while you are saving settings.
MEMO
You can also save the system settings by pressing the [Write] button in the system
setting screen.
Convenient Functions (UTILITY)
These functions let you back up the JD-XA's internal data to a USB flash drive, or to
restore data from a USB flash drive into the JD-XA.
Other utility functions let you return the JD-XA to its factory-set state, or initialize a
USB flash drive.
1.
Press the [Menu] button.
2.
Use the Cursor [K] [J] buttons to select "UTILITY," and then press the [Enter]
button.
The UTILITY screen appears.
Menu items
Explanation
Cursor [K] [J]
Backs up data to a file with the name you specify.
BACKUP
System and user setting (. SVD) and pattern (. BIN) files are created.
& "Backing Up Data (BACKUP)" (p. 15)
Restores data from the file you specify.
Data is restored from the system and user setting (. SVD) and
RESTORE
pattern (. BIN) files.
& "Restoring Data (RESTORE)" (p. 15)
& "Returning to the Factory Settings (FACTORY RESET)"
FACTORY RESET
(p. 15)
& "Formatting a USB Flash Drive (USB MEM FORMAT)"
USB MEM FORMAT
(p. 14)
3.
Use the Cursor [K] [J] buttons to select the item that you want to edit, and
press the [Enter] button.
14
Explanation
Switches the reverb on/off.
Type of reverb
Time length of reverberation
Volume of the reverb sound
Switches the master EQ on/off.
Adjusts the input gain of the master EQ.
Frequency of the low range.
Gain of the low frequency range.
Frequency of the middle range 1.
Gain of the middle frequency range 1.
Width of the middle frequency range 1.
Set a higher value for Q to narrow the range
to be affected.
Frequency of the middle range 2.
Gain of the middle frequency range 2.
Width of the middle frequency range 2.
Set a higher value for Q to narrow the range
to be affected.
Frequency of the middle range 3.
Gain of the middle frequency range 3.
Width of the middle frequency range 3.
Set a higher value for Q to narrow the range
to be affected.
Frequency of the high range.
Gain of the high frequency range.
Formatting a USB Flash Drive (USB MEM FORMAT)
* Never turn off the power or remove the USB flash drives while the screen indicates "Executing. "
* Carefully insert the USB flash drives all the way in—until it is firmly in place.
1.
Press the [Menu] button.
2.
Use the Cursor [K] [J] buttons to select "UTILITY," and then press the [Enter]
button.
3.
Use the Cursor [K] [J] buttons to select "USB MEM FORMAT," and then press
the [Enter] button.
A confirmation message appears.
Format USB Mem?
[Exit]:N [Ent]:Y
If you decide to cancel, press the [Exit] button.
4.
Press the [Enter] button to execute.
When formatting is complete, the following screen appears.
Completed!
The folder structure of a USB flash drive
EXPORT SMF folder
Exported SMF files are saved here.
IMPORT folder
Files that you want to import to the JD-XA should be copied here.
(File name) . SVD
(File name) . MID
ROLAND folder
JD-XA programs and backup data are saved here.
JD-XA folder
: Tone import
: SMF import
BACKUP folder
Backup data is saved here.
PROGRAM folder
Programs in the USB flash drive are
saved here.
A folder
Bank A program data
B folder
Bank B program data
P folder
Bank P program data
Advertisement
Table of Contents
