Advertisement
Operation
Connect the power cable to a 13 amp supply which is located in a safe, dry
area.
The switch on the heater is used to control the Heater. The【I】position
means on, the first indicator light will be turn red, the heater in ready
mode. The【O】 position means off.
The panel control:
The remote control:
Although the patio heater is waterproof, do not use when raining or in
wet conditions.
Never connect the power cable from the electrical supply, when the
patio heater is not in use.
Care and maintenance
•
When disconnected from the electrical supply, clean the surface of
the patio heater with a damp cloth. Never use corrosive or solvent
cleaners or immerse in water.
•
Any maintenance or repairs including replacing the halogen tube
should only be carried out by a qualified electrician or by a
recommended service center.
Technical specification
•
Power supply 230V~50Hz
•
Wattage max1800w
•
Net weight 7.5 kg
•
Insulation class I
•
Width23 cm; Lengh:109cm
If in doubt contact your supplier.
Primrose London
info@primrose.co.uk
Tel: 0118 9035210 (UK)
Tel: 0044 118 9035210 (outside of UK)
Advertisement
