Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Firefly OL1853
Summary of Contents for Firefly OL1853
- Page 1 Hanging Heater Type: OL1853 Assembly and operating instructions...
- Page 2 Please make sure that you read this manual thoroughly BEFORE assembling and using this product. This manual should be kept with the heater for further reference and for future use. Repair should always be done by a qualified technician. Always contact your dealer first. Do not attempt to disable or modify this heater in any way.
- Page 3 - Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over. - This heater may get hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.
- Page 4 ASSEMBLY Attachment to a ceiling The heater should be assembled to a concrete ceiling. The supplied mounting parts are not suitable for other surfaces. 1. Drill a hole with a diameter of 8 mm in the ceiling. 2. Push the self tapping hook screw in the drilled hole. 3.
- Page 5 - After using the heater, it always must be turned off with the button, the cord or the remote control and the power plug must be pulled out of the socket. - Allow the heater to cool completely before moving and storage. - Never use the heater when there are bad weather conditions like rain, snow, hail, or a thunderstorm.
Need help?
Do you have a question about the OL1853 and is the answer not in the manual?
Questions and answers