Advertisement
Connection to 220-240 Volts Power Supply
It is important to ensure that the electricity supply is of adequate
capacity for the electrical load required by the appliance being installed.
These appliances must be earthed.
Installation
The Heater is built with the best quality components in accordance to the
prevailing legal regulations and certified for safety in use. For best results
from the appliance please ensure that the installation is done by a qualified
electrician in accordance with the following instructions and taking full
account of current regulations. When using the heater, please carefully
follow the instructions and recommendations below.
You could change the position of the M4*8 screws
○
screws
9 for the best Angle of heating. We have 6 positions for your
choice. (near:0°，16°，32°；far: 0°，16°，32°)
Installation to Wall
When fixing the heater to a wall, ensure hinges are in the underside so
that the lid hands down in the open position.
Minimum required distances:
a) 500mm from the side wall
b) 500 mm from the ceiling
c)
○
7 and the M6*10
The heater must be fixed to a wall with the bracket supplied to allow
adequate ventilation.
Never fix or place heater near flammable or combustible materials.
Generally heaters must be placed at a safe distance (clear space) of at
least 2.0m from combustible materials and glass walls. If installed in
workshops or garages where inflammable or combustible paints are
used, the heaters must be installed at a distance of at least 4.0m from
the source of danger.
If the heaters are placed in areas where spray painting of any
description is taking place, they should not be used during the painting
operations.
Installation height above 1.8M
Never use the heater in particularly dusty and explosive areas.
Advertisement
