Pairing Your Mobile Device - Arcam Solo bar Handbook

Pairing your mobile device

The app requires your device to be paired
with the Solo bar via Bluetooth.
HDMI 1 HDMI 1 HDMI 1 HDMI 1 20 20 20 20
Make sure your device has Bluetooth turned
DIGITAL ST DIGITAL ST DIGITAL ST DIGITAL ST
on. For iOS devices follow these steps:
For Android devices, follow the instructions
supplied with your device.
Open Settings then tap Bluetooth. Slide Bluetooth switch to on position. Wait for Arcam Solo bar to appear under Should you need to unpair your device, tap
DEVICES and then tap to Connect. the information icon next to Connected
and then tap Forget this Device.
Note: A maximum of four Bluetooth source
devices can be paired to the Solo bar with
each device being available on a first-come-
first-served basis. Occasionally, if more than
one person wants use the Solo bar you may
need to unpair a device.
E-14
operation
Switching on Selecting a source
To wake the Solo bar from standby, press the To select a particular source, press the
button on the front panel or the remote. or buttons on the front panel or remote
ARCAM Solo bar appears briefly on the until that source is shown on the front panel
front panel display followed by the currently display. The following sources are available:
selected input source, volume setting and
HDMI 1
audio mode.
HDMI 2
HDMI 3
Note: If the unit is to be left unused for an
HDMI 4
extended period, disconnect it from the
OPTICAL
mains supply to save power.
COAX
AUX
BLUETOOTH
Note: If supported, some HDMI devices may
identify themselves by their device name.
Volume control
If your TV is connected using ARC and Adjust the volume by pressing the
you have followed the setup procedure on buttons on the front panel or remote.
page 16 the display panel will show the
following message when watching TV. Muting output
The sound output of the Solo bar can be
TV/ARC
silenced by pressing
control. If the unit is muted, the volume
Audio Return Channel (ARC) is a feature setting changes to MUTE
display panel.
built into the latest version of HDMI which
allows your TV to send audio back down to
the HDMI cable to the soundbar. To cancel mute, press
or / to change the volume.
Note: This is displayed automatically when
an ARC enabled TV is connected.
E-15
or
on the remote
on the front
for a second time