Remote Control - Sanyo PLC-HF15000L Owner's Manual

Part Names and Functions

Remote Control

14
STAND-BY button
Turns the projector off. (p.25)
SIGNAL EMISSION indicator
Lights red while a signal is being sent from the remote control unit
to the projector.
ON button
Turns the projector on. (p.24)
SHUTTER button
Close s the built-in shutter for light blocking. (pp.28, 29)
MENU button
Opens or closes the On-Screen MENU. (pp.26, 27)
POINT buttons
–Select an item or adjust the value in the ON-SCREEN MENU. (p.26)
–Pan the image in DIGITAL ZOOM +/– mode. (p.45)
LENS SHIFT button
Selects the LENS SHIFT function. (p.29)
ZOOM buttons
Zoom in and out the images. (p.29)
D.ZOOM
button
Selects the Digital zoom +/- mode and resize the image. (pp.29, 45)
FREEZE button
Freezes the picture on the screen. (p.31)
KEYSTONE button
Corrects keystone distortion. (pp.32, 46, 53)
P-TIMER button
Operates the P-TIMER function. (pp.31, 69)
INFO. button
Displays the input source information. (p.29)
FILTER button
To schedule a filter cleaning task. (p.31)
SCREEN button
Selects the screen size. (pp.44-46, 52-53)
LIGHT button
Lights the buttons on the remote control for about 10 seconds.
AUTO PC button
Automatically adjusts the computer image to its optimum setting.
(pp.29, 37)
SELECT button
–Executes the selected item. (p.26)
–Expands or compress the image in the DIGITAL ZOOM +/-mode.
(p.45)
IMAGE ADJUST button
Enters the image level adjustment mode. (pp.29, 41-43, 49-51)
FOCUS buttons
Adjusts the focus. (p.29)
IMAGE SEL. button
Selects the image level. (pp.31, 40, 48)
INPUT 1, 2, 3, and 4 buttons
Select an input source. (pp.33-35)
PIP button
Operates the Picture In Picture function. (p.31)
ON/OFF switch
When using the remote control, set this switch to "ON" .
Wired Remote Jack
Connects the remote control cable (not supplied) to this jack
when using as a wired remote control.
Number buttons
Use these buttons when setting the remote control codes (p.16)
or when entering the PIN code numbers (pp. 24, 61, 65).