Lens Adjustment - Sanyo PLC-HF15000L Owner's Manual

Continue from the previous page.
Item Description
Screen aspect ....Sets the aspect ratio to fit the screen.
(Full, 16:9, 16:10, 4:3)
*Full is for flexible aspect ratio.
*Some Screen settings are limited
depending on the Screen aspect as
shown in the below table.
Keystone................Corrects the keystone distortion of the
projected image on the screen by press-
ing the Up/Down/Left/Right buttons.
Click Reset to reset the keystone correc-
tion.
Digital zoom.......Adjusts the image zoom in and out at
computer input mode.
Click OFF to return the image to its nor-
mal size.
Reset.........................Resets the settings of Screen, Ceiling,
Rear, Screen aspect, Keystone and Digital
zoom.

Lens adjustment

Item Description
Zoom .......................Adjusts the image zoom in and out.
Focus........................Adjusts the focus of the image.
Lens shift...............Positions to the desired point by pressing the Up/Down/Left/Right buttons.
Click Reset to return to the center position.
* Step(s)..................Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right
buttons to adjust them quickly.
Screen Aspect
Screen mode Video
Normal
Full
Wide(16:9)
Zoom
True
Natural wide
Custom
The mark " " means that the available screen mode in the selected input source system.
*1 The error message appears when selecting the disabled screen mode indicated with "*1".
*2 Natural wide cannot be selected when 720p, 1035i, 1080i, 1080p or 2K is selected in AV system
menu.
*3 Wide(16:9) can be selected when the video signal is 2K.
Full or 16:10 16:9
Input source Input source
PC Video
*1
*1 *1
*2 *1 *2
4:3
Input source
PC Video PC
*1 *3
*1
*1 *1 *1
Setting up the projector
39