TP-Link TD-8616 Manual page 2

Plug the provided Power Adapter
into the Power jack on the back of
the Modem and the other end to a
standard electrical wall socket.
If no telephone is needed, please connect the LINE port of the Modem to the
Note
wall jack using the telephone line directly.
Turn on all of your network devices, including your computer and the Modem
then check to see if the LEDs of the Modem display normally as the diagram
below describes.
Power: Solid light
LAN: Solid light if the LAN port is
connected
ADSL: Flashing when the modem
is synchronizing; Solid light if the
modem is synchronized
If the LEDs display abnormally, please check to see if all the cable connectors
Note
(power adapter, phone line and Ethernet cable) are well connected to your
device. With the phone line well connected, if the ADSL LED turns off after a
quick-flash, please contact your ISP to ensure that your internet connection is
active.
2