4-hour rapid charger for aa and aaa nimh and nicd rechargeable batteries (12 pages)
Summary of Contents for WATSON Rapid Charger
Page 1
Rapid Charger for CR123A and CR2 3 Volt Lithium Batteries Owner's Manual Please read before using this equipment.
Page 3
Thank you for purchasing the Watson Rapid Charger for CR123A / CR2 3 Volt batteries. Browse through this manual for information and useful tips on how to use your new equipment. >...
Page 4
The Watson Rapid Charger will provide your batteries with outstanding power and performance for your electronic devices. The batteries can be charged up to 1,000 times and provide high performance for high-drain devices. The charger can be used to simultaneously recharge two CR123A 3 Volt batteries, two CR2 3 Volt batteries, or one of each.
CHARGING OPERATION Insert the AC or DC adapter into the back of the charger. Place one or two CR123A or CR2 batteries into the charging slots as indicated by the polarity symbols (+and-) marked inside each chamber. Plug the adapter cord into an AC outlet or the DC charging socket of your automobile.
LED STATUS: Color Status Charging Flashing blue Charge is 80%–90% complete Blue Charge is 90%–100% complete Flashing red and blue Battery error If the LED lights do not turn on, make sure that you have inserted the correct type of batteries, and that they are facing the proper direction.
Page 7
LED Status Lights Battery connectors AC Adapter DC Adapter LED Status / Charging Time | 7...
IMPORTANT SAFETY INSTRUCTIONS: PLEASE READ THESE OPERATING INSTRUCTIONS BEFORE USING YOUR CHARGER. Only charge rechargeable CR123A or CR2 3 Volt Lithium-ion batteries. Do not charge Alkaline, Ni-MH, Ni-Cd, Carbon Zinc, or any other voltage, type, or size battery. Charging the wrong type of batteries may cause an explosion, rupture, or leakage, resulting in personal injury and property damage.
Page 9
WARNING: CAUTION! TO REDUCE THE RISK OF DAMAGE: Do not expose the batteries to water or liquids. Do not heat or dispose the batteries or charger in fire. Do not tear off the label or disassemble. The battery charger is for indoor use only.
SPECIFICATIONS: Input Voltage 100~240V AC, 50/60 Hz 12V DC Output 3.7V DC, 300 mA per channel Operating Temp. 32-113°F (0-45°C) 2.125 x 3.375 x 0.875 Dimensions 54 x 86 x 22 mm Specifications are typical; individual units may vary. Specifications are subject to change and improvement without notice.
Page 11
To obtain warranty coverage, contact the Watson Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Watson along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.
Page 12
w w w . p o w e r e d b y w a t s o n . c o m...