Related Manuals for WATSON Duo
Summary of Contents for WATSON Duo
- Page 1 Duo Charger for Digital Camera and Camcorder Batteries Owner's Manual Please read before using this equipment.
- Page 3 Thank you for purchasing the Watson Duo Charger. Browse through this manual for instructions and useful tips on how to use your new equipment. >...
- Page 4 Charges two different types of batteries with different voltages simultaneously. Plate switching Charger plate is interchangeable, allowing the Duo Charger to charge a wide variety of batteries. (Charging plates available for purchase separately.) Battery tester Test the charge state of your battery...
- Page 5 Automatically detects when the battery is fully charged and stops charging to prevent damage to your batteries. Overheat protection The Duo Charger senses when the battery is about to overheat and immediately stops charging. Short circuit protection Protects the charger from defective or shorted batteries.
-
Page 6: Charging Operation
This intelligent charger for digital camera and camcorder batteries was designed with advanced switching power source technology, allowing you to charge your batteries at home or on the road. The charger is compatible with the brand(s) and model(s) of Li-ion rechargeable batteries listed on the packaging for this manual. -
Page 7: Test Button
You can use your Duo Charger to charge USB devices while you're also charging your digital camera or camcorder batteries. Plug the USB end of the devices's charging cable into the USB output jack on the side of the Duo Charger. The USB output is displayed on the LCD screen. -
Page 8: Lcd Information
LCD INFORMATION: • The top screen above will display when you first plug in the Duo Charger. • Once charging begins, the screen will be similar to the middle display shown above. You can charge two batteries independently. • When charge is complete, "FULL" will appear above the battery icon and the screen will display similar to the bottom illustration. - Page 9 Test Button AC Power Output Charging Plate DC Power Overview | 9...
-
Page 10: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS: CAUTION! TO REDUCE THE RISK OF DAMAGE, SAVE THESE INSTRUCTIONS • Do not store, place, or use the charger where it may come into contact with excess heat, water or moisture. • High-voltage internal components present the risk of electric shock when exposed. •... -
Page 11: Ac Adapter Precautions
• The charger, adapters, and batteries may feel warm during the charging process. This is normal. • Unplug the AC adapter from the power outlet and clean the area around the prongs of the plug when necessary. The presence of dust around the prongs can cause fire. - Page 12 • Never touch the AC adapter while your hands are wet. Doing so can cause electric shock. • Do not overload extension cords or wall outlets. Doing so can cause fire and electric shock. Indoor use only. Do not expose the charger to rain or snow. •...
- Page 13 TO MAXIMIZE BATTERY PERFORMANCE • Make sure the battery is fully charged before use. • Clean the battery and terminals with a clean, soft, dry cloth. • The battery may be warm during use or recharging. This is normal. • When storing the battery for an extended period, be sure that it is not completely charged, nor completely discharged.
-
Page 14: Specifications
SPECIFICATIONS: AC 100-240V, 50/60 HZ Input Voltage DC 12/24 2A Output DC 1.2-8.4 V 2A (maximum) DC 5V2A (maximum) 2-6 Hours Charging Time 32°F to 104°F Operating Temp. (0°C to 40°C) Storage Temp. -4°F to 140°F (-20°C to 60°C) 4.9" x 4.5" x 1.75" Dimensions (124 x 114 x 44.5 mm) Weight... - Page 15 ONE-YEAR LIMITED WARRANTY This Watson product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty...
- Page 16 ® w w w . p o w e r e d b y w a t s o n . c o m...