Placing The Appliance In The Niche - Miele TX3587 Operating And Installation Instructions

Placing the appliance in the
niche
If you are installing two appliances
side by side, now secure the
appliances to one another (see the
instructions for the side-by-side
installation kit).
^ Unscrew the plinth facing.
^ Protect the adjacent furniture fronts.
^ Plug in the appliance a.
Connection should be made via a
suitable switched socket. The
socket should be close to the
appliance and easily accessible.
Otherwise the appliance should be
connected via an external all-pole
switch with a sufficient contact gap
in the open position.
When installing two appliances side
by side, each appliance must have
its own separate socket.
^ Secure the cable to prevent it
becoming caught:
Tie a piece of string to the middle of
the cable, and as the appliance is
being pushed into the niche, pull the
cable forward underneath the
appliance b.
^ Push the appliance into the niche.
If the appliance does not slide easily
into the niche (e.g. if the floor is
uneven),
^ adjust the rear feet slightly (see
"Aligning the appliance").
Then push the appliance into the
niche, making sure that you do not
damage the electrical cable.
^ Remove the edge protector from the
adjacent furniture fronts.
Installation
63