LG StudioWorks 560LS Service Manual page 9

CN3
CN2
(b)
(c)
5. BACKLIGHT REMOVAL
(1) Remove two screws (a).
(2) Remove the Backlight from the LCD Module.
Top (Upper) Backlight Ass'y
(a)
(a)
Bottom (Lower) Backlight Ass'y
(d)
(b)
J5
J4
J6
(a)
(d)
(c)
LCD Module
(d)
4. INVERTER, POWER, CONTROL, AND MAIN PCB
(a)
ASSEMBLY REMOVAL
(a)
(1) Disconnect J4, J6 and J5.
(2) Remove four screws (a).
(a)
(3) Remove the Main PCB Ass'y.
(d)
(4) Disconnect CN2 and CN3.
(5) Remove two screws (b).
(6) Remove the Inverter PCB Ass'y.
(7) Remove two screws (c).
(8) Remove the Control and Power PCB Ass'y.
(9) Remove four screws (d).
(10) Remove the Front Cabinet..
6. LCD MODULE REMOVAL
(1) Remove four screws (a).
(2) Separate the LCD Module from the Main Frame.
(a)
(a)
(a)
(a)
- 9 -