Snmp - Panasonic LB-DH8 series Operator's Manual

Operations

SNMP

The unit provides SNMP agent feature to manage the unit by remote monitoring.
The feature supports SNMP version 1 and 2c. This enables you to acquire the information about the unit from the
SNMP manager and to send the information from the unit to SNMP manager (SNMP Trap notification).
≥ Specifying the settings from SNMP manager to the unit are not supported.
≥ To use the SNMP feature, select "Config"/"Configure"  "SNMP" on the control panel or the Web interface for the
settings. ( 58, 96)
≥ In order to improve security, changing "Community Name" from the default "public" is recommended. ( 58, 96)
≥ The object IDs (OID) which respond to SNMP include IDs defined by the Standard MIB (MIB - II) and the company
extended MIB (OID: 1. 3. 6. 1. 4. 1. 258. 120. 100).
≥ The standard MIB contains "System Name", "Location" and Network settings.
≥ SNMP responds to the company extended MIB with information including "System Name", "Location", "Support
Name", "Support Phone", "Support Email", equipment usage status, and S.M.A.R.T. information.
≥ Also responds with a dedicated community name based on "Community Name" for maintenance. Response is for
internal information only such as equipment usage or S.M.A.R.T. information.
∫ SNMP trap
The unit notifies an SNMP trap to the SNMP manager about the changes in the unit status, or when an error occurs
or it generates a warning, or access to the magazine drawer or Web interface.
The additional information included in the SNMP trap are the "Vendor Name", "Product Name", "Serial Number",
"Software Version", "System Name", "Location", and information on each trap ID. For more information, refer to the
company extended MIB file for the DATA ARCHIVER. (below)
The events notify by SNMP trap are as follows.
Trap ID Symbol name
1 trapSystemStatusChange
2 trapChangerStatusChange
3 trapDriveStatusChange
4 trapDrawerUnlock
5 trapError
6 trapWarning
7 trapWebLogin
8 trapWebLogout
∫ Obtain the company extended MIB file for the DATA ARCHIVER
Download the company extended MIB file by selecting "Configure"  "SNMP"  "MIB File" from the Web interface.
≥ If the software in the unit has been updated, the company extended MIB file must be downloaded again.
Various Functions
Events
Change of system status (System Status)
Change of changer unit status (Changer Status)
Change of drive system status (Drive Status)
Magazine drawer unlocked
Error occurred
Generation of warning
Log in to the Web interface
Log out of the Web interface
107