Table of Contents
Advertisement
Operations
Email Notification <Configure>
Makes settings for email notification.
≥ SMTP is used for email notification. Note that no email receiving function is available.
≥ Change the settings, then select "Submit" to accept the change.
Notify Errors
Notify Warnings
Enable Email Test
To Email Address
SMTP Server Address
(IPv4 or IPv6)
Host Name
Domain Name
Web interface operation
Selects the use or non-use of an email notification at error occurrence.
≥ This function is disabled in the initial setting.
Selects the use or non-use of an email notification at warning occurrence.
≥ This function is disabled in the initial setting.
Sends a test email message to the destination you set. ( 106)
≥ This function is disabled in the initial setting.
Inputs an email destination address.
≥ A maximum of 256 characters can be input.
Sets an SMTP server address.
≥ Inputs an IPv4 address, IPv6 address, or fully qualified domain name (FQDN, a
maximum of 39 characters).
Sets a host name.
≥ The host name is used for email notification.
≥ A maximum of 32 characters can be input.
≥ The initial setting is "LB-DH8".
Sets a domain name.
≥ A maximum of 32 characters can be input.
≥ The domain name is used as an email source address.
95
Advertisement
Table of Contents
