Table of Contents
Advertisement
Operations
Log functions
The unit provides a log function to check the history of errors or warnings.
≥ To obtain the log, select "Manage" "Save Log Dump" on the control panel or Web interface. ( 68, 99)
≥ When executing "Save Log Dump" on the control panel, the following files are saved.
luyymmdd.txt*
1
: Log file for the user
lsyymmdd.zip*
1
: Log file for your support service provider*
ldyymmdd.bin*
1
: Dump file for your support service provider*
*1
"yymmdd" indicates the year, month, and day.
*2
Send it if there was an instruction from your support service provider representative.
∫ User log files
` Date/Time: Date of the log
Date is displayed with the format you specified and the time is displayed in 24-hour format.
` Device Information: General information about the unit
For more information, refer to the following item on the control panel or the Web interface.
"Monitor" "System" ( 38, 74)
"Config"/"Configure" "Support Contact" ( 66, 89)
≥ "Location" will not be seen on the control panel.
` S.M.A.R.T. Information: Various information of S.M.A.R.T.
For more information, refer to the following item on the control panel or the Web interface.
"Monitor" "S.M.A.R.T." ( 51, 84)
` Error Trace: Error history
For more information on error codes, refer to "List of error codes" ( 130).
` Warning Trace: Warning history
For more information on warning codes, refer to "List of warning codes" ( 132).
` Standard Trace: Information history
You can check the information below.
≥ Log in/Log out to the Web interface
≥ Large volume of pings to the unit
≥ Time synchronization information (when "Time Server" ( 54)/"Enable Time Server" ( 87) is enabled.)
Various Functions
2
2
110
Advertisement
Table of Contents
