Table of Contents
Advertisement
INSTALLATION
!
t
Remove all packing material and accessories.
Examine the oven for any damage such as dents or a broken door.
Do not install if oven is damaged.
1. Select a level surface that provides enough open space for the inlet and/or
outlet vents.
b
Leave a minimum
clearance of 7.5 cm above the oven.
Do not remove the legs from the bottom of the oven to ensure
proper air flow.
Blocking the inlet and/or outlet opening can damage the oven
Do not install oven over a range, cooktop or other heat-
producing appliance.
Place the oven as far away from radios and TV.'s as possible.
Operation of microwave
oven may cause interference to your
radio, TV. Plug the microwave
oven into a different outlet.
When the cabinet is covered with a ~rotective film, remove the
film to fully show the intended colour and finish.
2. Plug your oven into a standard household outlet.
When installing in a Built-in situation, you must allowa minimum
of 7.5cm
on each side and the top and at the back of the microwave
oven for
ventilation.
Failing to do so might cause damage to the microwave
oven.
A minimum
clearance of 7,5 cm is required between the oven and anv
adjacent walls including the back wall.
CAUTION: Use with care when handling oven. The control panel side of oven
is heavy inside.
Advertisement
Table of Contents
