Custom Programs - Sanyo EM-X4111 Instruction Manual

CUSTOM PROGRAMS
For food/recipes prepared most often, you can easily custom program your
own sequences or cooking stages
(power levels/cooking times). You can set
3 different custom programs (Cl, C2 and C3). Each program may have
1 -3 cooking stages.
For example, you frequently cook 1 cup long-grain rice. For Stage 1 you use
100'7. power for 5 minutes to bring water to a boil. You then add rice, salt and
butter and for Stage 2 you use 30'% power for 20 minutes to cook rice. To set
these 2 cooking sequences in the first Custom Program (Cl):
Stage 1 for 5 minutes at PIOO (100% power)
Stage 2 for 20 minutes at P30 (30% power)
Press CUSTOM PROGRAMS once.
1
C-1 appears in the display.
m
CUSTOM
PROGRAMS
Press 5,0 and O to enter 5 minutes.
2
(ImxID .
Press POWER LEVEL once to select
n
Ill
m
3
Ploo.
POWER
LEVEL
m
.
Press 2,0,0 and O to enter 20 minutes.
4 "
(zxImm
Press POWER LEVEL repeatedly until
5
'P30 appears in display.
m
POWER
LEVEL
Press CUSTOM PROGRAMS once
~ The Custom Program Cl is now
o
CUSTOM
programmed into the microwave
PROGRAMS
memory.
To use a Custom Procwam:
Once programming is completed, you
can call up any of your Custom
1 Programs (Cl, C2 orC3) by pressing the
o
CUSTOM
PROGRAMS
CUSTOM PROGRAMS keypad once,
twice or 3 times.
Press START.
2
m
START
To delete a Custom Program:
Call up the Custom Programs(Cl, C2 or
I c3) you want to delete by pressing
m
CUSTOM
PROGRAMS
CUSTOM PROGRAMS.
Press O and then CUSTOM
2
PROGRAMS.
m~-~'
Note: For custom programming, only Time Cooking can be used.
. For more details, see
page 13 for multi-stage cooking.