Genie GS-1530 Operator's Manual page 23

Second Edition • Fifth Printing
Auxiliary Lowering
1 Pull the auxiliary lowering knob.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out the platform and ground red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Move the up/down toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the platform and ground red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Press the lift function select button.
2 Press and hold the function enable switch on the
control handle.
3 Move the control handle according to the
markings on the control panel.
When lowering the platform, the platform should
stop when it is 2.1 m from the ground. Be sure the
area below the platform is clear of personnel and
obstructions before continuing. To continue
lowering, release the control handle, wait 5
seconds, then move the control handle again.
Part No. 82660 Genie GS-1530 and GS-1930 and GS-1532 and GS-1932
OPERATING INSTRUCTIONS
To Steer
1 Press the drive function select button.
2 Press and hold the function enable switch on the
control handle.
3 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
To Drive
1 Press the drive function select button.
2 Press and hold the function enable switch on the
control handle.
3 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the low battery indicator light is on or when
the last light on the battery level indicator is
flashing.
Operator's Manual
21