To View The Display Units; To View The % Output Power; Controller Parameters - Barnstead FB1310M Operation And Repair Manual And Parts List

S S
INGLE ETPOINT CONTROLLER
12
desired setpoint value is displayed and then
release the button. A few seconds after the button
is released, the controller will accept the new
value and revert to the HOME DISPLAY.

To View the Display Units

From the HOME DISPLAY press the SCROLL
button. The display will show the temperature
units in °C/F/K and then return to the HOME DIS-
PLAY. (Call Customer Service if you require a dif-
ferent temperature unit.)

To View the % Output Power

From the HOME DISPLAY press the SCROLL
button twice. Press and release the UP or DOWN
button to view the % output power. This value is a
read-only value and cannot be changed.

Controller Parameters

Home display
°C: Temperature units in Celsius. Temperature
units can not be changed without entering the
configuration. Contact Customer Service if a dif-
ferent temperature unit is required.
OP: % output power demand.
IdHi: Deviation high alarm.
Al List
IdHi: Deviation high alarm.